JTAG-lock-pick Tiny 2 is an ARM core processors' JTAG using USB 2.0 bus to connect to PC. The device is based on FTDI FT232H chip – a single channel USB <=> UART/FIFO converter. Designs goals of JTAG-lock-pick Tiny 2 project were to create a small and cheap, but at the same time fully functional and fast, interface that would fit various needs.
DRSH250 is a 250 Watt Mercury Vapor UV and visible light emitting lamp designed in Russia for UV microscopes and sterilizing equipment. The lamp is set to operate at 127VAC and a current limiting ballast connected in series to prevent overheating since the lamp's resistance decreases along with the increase of current through it. Starting current needs to be in the range of 6 Amps with working Amperage of 4 Amps after the light gets stable after some 10 minutes.
AIR SLIDE, PARKER SLIDE #P5E-H032LBN0076 BORE, 32 MM STROKE, 75 MM DIAMETER OF GUIDE RODS, 12 MM PORTS, G-1/8, SAME AS BRITISH PIPE THREADS, COMES WITH 2 PUSH TO CONNECT FLOW CONTROLS FOR 6 MM TUBE MOUNTING HOLES AND PIN HOLES ON THE SIDES AND BACK MAX AIR PRESSURE, 145 PSI / 10 BAR **CYLINDER HAS A ROD LOCK ON IT. THERE
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
