tube plug for sale, brand-new and used.

Avaya 5 Pin 4B ( gas tube with sneak current protection ) protectors. These have been just taken out of service from a clean dry environment and were only in service a couple of years. They look new.

New Caulk Silicone Adhesive Cement Grease Tube Saver Caulk Saver Plug This handy caulk plug works with any item that comes in a tube to keep the product fresh. Great for caulk, silicone, adhesive, cement and grease, this caulk saver is easy to use and clean, leaving little to no mess or waste! Save time, money and product with this convenient caulk saver plug.

SMC KJU03-99 PBT Push-To-Connect Tube Fitting, Plug-in Wye, 5/32" Tube The SMC KJX plug-in wye fitting is made of polybutylene terephthalate (PBT) and has tube connectors. This wye fitting with plug-in connector joins three pipes through a main run and two branch lines that split off at angles from the main. It is a push-to-connect fitting that connects to pipes or tubing on all three ends.

SMC KJR01-07 PBT Push-To-Connect Tube Fitting, Plug-in Reducing Coupler, 1/8" Tube OD x 1/4" Tube OD Brand Name SMC CorporationMaterial Type PBT (Polybutylene Terephthalate)Maximum Pressure 150 PSILowerTemperature Range -5 Degrees CelsiusUpper Temperature Range 60 Degrees CelsiusSpecification Met JIS B 0203System of

Here is a NIB Tube & Plug assembly for a Starrett machinist level

STARRETT 98-8 Machinists Level Tube and Plug Replacement. Here is a very nice piece, a Starrett tube and plug replacement for a 98-8 Level.It is BNIB, can be used to replace your old tube or fix 2 at 90 degrees to each other on your lathe / milling machine etc to have a permanent gauge reference for a level.Could be mounted in a custom housing too. These replacements retail for around $80.00, my bidding starts at $0.99 with a low reserve of just $40.00

High quality heavy duty plastic finishing plug, end cap for 1-1/2" outside diameter steel square tubing. These fit 10-14 gauge wall 1 1/2 x 1 1/2" steel tubing. Heavy wall plastic plugs for square tubing are manufactured to provide a secure fit on multiple tube gauges.

CENTRIFUGE MACHINE

Karl Storz

121714 Description You are bidding on the following NEW items: Larson Electronics - Explosion Proof Paint Spray Booth LED Light on Dolly Cart with Wheels - 4 foot 2 lamp (Voltage: 120-277VAC, Color Temp: 5600K, Cord Cap: 6-20) Part # EPLCD-48-2L-LED-1227-5600K-2023-250V Spec Sheet Video Click for more pictures and information

SMC KJR01-03 PBT Push-To-Connect Tube Fitting, Plug-in Reducing Coupler, 1/8" Tube OD x 5/32" Tube OD The SMC KJR plug-in reducing coupler fitting is made of polybutylene terephthalate (PBT) and has tube connectors. This reducing coupler has a plug-in end suitable for connecting two pipes with different diameters. It is a push-to-connect fitting that connects to pipes or tubing on both ends.

<div style="text-align:center">&

Don't go sticking your paws under a chassis full of high voltage wires trying to check tube voltages. Plug one of these in the tube socket, plug your tube into this adapter, and the voltages are available at test points above the chassis - much nicer and safer. This is a nice used Vector Electronics tube adapter kit made for the Navy.

This auction is for one complete plug in socket deck for a Hickok Navy model 118A or 118B cardmatic tube tester as shown. This was removed from a parts unit and is ready to install in your tester. Check out our other auctions as we will be listing other parts from this tester.