tube plugs for sale, brand-new and used.

Eastman Blue Streak II Cloth Cutter This is a class 629X model Uses a 6" knife Cuts over 4 inches of stacked cloth Two speed motor Motor is rated 110 Volts, 10 Amps single phase This machine was used in the late 1990s to cut aprons to fit a fishing float-tube. The apron product was only made for a brief period before being cancelled and this machine has been sitting on a shelf ever since. Appears to be in great condition but it is missing the power cord and therefore cannot be tested.

SSCOR 2402 S-Scort Jr. Quickdraw Suction w/ Canisters Tubing New SSCOR S-Scort® Jr. Quickdraw Portable Emergency Suction Unit.

Bought this as part of estate, handwritten note says Hickok 550x updated calibration verified, but meter says model ac510x, not sure if that is just the meter #.  One other hand note says four pin tubes don't check over one of the plugs.  Cord coating is cracking on the

BOX OF TEN (10) NEW THOMAS C. WILSON 22045 7/8" TUBE OD 15-22 GAUGE 316SS CONDENSER/HEAST EXCHANGER TUBE PLUGS. COMES WITH 30-DAY WARRANTY S/H $9.00 FOR THE CONTINENTAL U.S.

Dixon Valve & Coupling Dixon Valve DCP17 Steel Air Chief Industrial Interchange Air Fitting, Quick-Connect Plug, 1/2" Coupling x 1/2" NPT Male Thread, 150 CFM Flow Rating

I think they are 1/2 hp.The I.D. plates are missing.These are both sleeve bearings which have to be oiled every six months or so.One of the motors has a broken fill tube & has no fill tube caps/plugs.Price is per motor.Will make deal on purchase of both.

BOX OF TEN (10) NEW THOMAS C. WILSON 22044 5/8" TUBE OD 15-22 GAUGE 316SS CONDENSER/HEAT EXCHANGER TUBE PLUGS. COMES WITH 30-DAY WARRANTY S/H $9.00 FOR THE CONTINENTAL U.S.

Lytron9" x 20" Copper Tube Dual Fan Cooled Heat Exchanger 4740 Btu / Hr2 Mechatronics 115 Volt Fans2.5” Thickness3/8” OD Copper TubeIncludes Fan Hardware & Plugs Model #6220G1SBMSRP: $750 Unused open box surplus item in very good condition.

This kit includes the hardware and wire needed to build a set of test probes for most Heathkit (IM-11,13,18,28,5218,5228) Vacuum Tube Volt Meters and many others that use a single 1/4" phone style meter connection. (For 3 Wire units like Heathkit V4/5/6/7 units you will need additional banana plugs and slightly different wire setup - see my other auctions for A Complete Kit for these units) Typical application involves using one probe for DC Measur

THESE ARE FROM 1962 MILITARY LOTNEW IN BOXES

You are bidding on a NEW old stock 3M SLiC tm AERIAL TERMINAL with TYCO DTerminator Blocks .. Measures 30 inches long and has appox 5 inch opening at each end .. has 2 coiled rubber seals for each end with 3 plugs for different size cable , comes with instructions and has 2 ground cables ?

This kit includes the hardware and wire needed to build a set of test probes for Heathkit Vacuum Tube Volt Meters (VTVM's) requiring 3 Leads (V-4/5/6/7 and A Models as well as the IM-32) and many others that use a 1/4" phone style meter connection for DC and Banana Plugs for the Ground/Common and AC/Ohms Leads. One probe is for DC Measurement (with the resistor installed) and the other probe is for AC/Ohms Measurement, and a 3rd lead is the ground lead and has an Alligator Clip.