u nuts and bolts for sale, brand-new and used.

Hi, up for sale is 1 set of small, aluminum, "2 hole" pins. These are turned, and tapered on the threads for EXTREME accuracy, and the threads are tapered on the end with the lathe, and are spot faced on the end for 3/4" decals, which are High Quality, and U.V resistant, polymer domed. These will ship in a 3X3X2 inch, tuck top box.

LUMBERG RST3-RKWT/LEDA4-3-224/1 QD CORD SET 3 PIN MALE CONNECTOR 4 POL GENERAL INFORMATION: MANUFACTURED BY: LUMBERG MANUFACTURER PART NUMBER: RST3-RKWT/LEDA4-3-224/1 DESCRIPTION: LUMBERG RST3-RKWT/LEDA4-3-224/1 QD CORD SET 3 PIN MALE CONNECTOR 4 POLE FEMALE CONNECTOR PART IS USED AND HAS SIGNS OF WEAR.

Brand/Series : JT Series Current Rating : 0 to 30 A Material, Contact : Tin Plated Copper Alloy Mounting Style : DIN Rail Standards : CE Approved/CSA Certified (Class 6225-01)/IEC 60529/UL 4248 Listed Terminal Type : 30 A Dual Port Torque 20 in-lb Voltage Rating : 600 V ac PART IS USED AND HAS SIGNS OF WEAR. PURCHASING TERMS FROM OUR EBAY STORE ARE AS FOLLOWS: Misc -Upon purchasing any items from our eBay store you are in agreement with all of the purchasing terms found on this page!

THIS IS A VINTAGE 1940's ERA HICKOK MICROMHOS METER MODEL 534 TUBE TESTER PANEL THIS IS FROM AN ESTATE SALE OF A ENGINEER WHO HAD A VERY LARGE COLLECTION OF TEST EQUIPMENT THE GLASS IS GOOD AND IT HAS VERY LITTLE WEAR IT HAS THE 4 MOUNTING BOLTS WITH 4 NUTS TO REATTACH IT SEE MY PICTURES OF THE ACTUAL ITEM YOU WILL RECEIVE KEEP CHECKING BACK AS WE START TO LIST A L

SprayZone Front Air Flow Spray Booth Model # SZ-FAF 24 SE Front Air Flow: Air enters the booth cabin through front filtered doors, and exhausted at the rear centered exhaust plenum.

Crossfire SEMI DOWN DRAFT paint spray booth Airflow: Air enters booth cabin through the top front filtered plenum, and exhausted at the rear-centered exhaust filter plenum.

The Evolution Standard is an auto booth designed to direct the airflow entering the booth cabin through the fully filtered ceiling plenum, and exhaust it at the both lower sides, exhaust plenums. This booth is customized to fulfill at the rigorous needs of the more advanced water-borne coatings. CALL US OR TEXT US AT

The Evolution Standard is an auto booth designed to direct the airflow entering the booth cabin through the fully filtered ceiling plenum, and exhaust it at the both lower, side, exhaust it at the both lower, side, exhaust plenums. This booth is customized to fulfill at the rigorous needs of the more advanced water-borne coatings.

Uniburr 1819 Standard Deburring Tool Bit, Small Product Features 61 Rockwe

Uniburr 1816 Plus Deburring Tool Bit, Small Product Features 92 Rockwell T

[2] NEW HARLOC 4900 DEADBOLT SINGLE POLISHED BRASS 49-820-SP-SGL-03 NEW NEVER USED COMES COMPLETE WITH KEYS AND ALL PLEASE CHECK IN TO ALL OUR OTHER EBAY ITEMS OR CALL STONY BOYS AT 708 825 3684 Add a 7.00 surcharge for Alaska, Hawaii, and Puerto RicoPURCHASING TERMS FROM OUR EBAY STORE ARE AS FOLLOWS: Misc -Upon purchasing any items from our eBay store you are in agreement with all of the purchasi

Package of Dual Rotary Decks Sealed package of ceramic rotary switch parts came with a lot of Centralab switches that we purchased, so though they are not marked, we believe them to be Centralab also. Package includes (4) two-tier ceramic decks, each with 18-solder contact positions. The bottom deck of each measures 2-3/4" x 2", while the top deck measures 1-7/16" in diameter.

I have for auction a great early piece of telephone history. Here is a Weston Electrical Instrument Corp., Newark, NJ, U.S.A. 1000.

---------------------------------------------------------------- Overstock Clearance....limited stock available Coupling for 1/4" shaft Nema 23 motors ------------------------------

---------------------------------------------------------------- *** ?.. Special limited time holiday pricing ..? *** ---------------------------------------------------------------- Coupling for 1/4" shaft Nema 23 motors ----------------------------------------------------------------

Mounting L Bracket ! This is a Brand New mounting L bracket for NEMA 23 or 57mm (as well as 56mm) motors. Yes, you could make it yourself but considering the time required for all cutting, bending, drilling, tapping...etc, isn't it better to have it ready for just $13 ?

include("http://