Union Butterfield 5210084 Cobalt Square Nose End Mill, 6.5 x 1" Diameter, US $99.95 – Picture 0

Union Butterfield 5210084 Cobalt Square Nose End Mill, 6.5 x 1" Diameter, US $99.95 – Picture 1

Union Butterfield 5210084 Cobalt Square Nose End Mill, 6.5 X 1" Diameter

US $99.95

Los Angeles, California, United States
Jan 30th

Open on mobile:
QR code

Union Butterfield 5210084 Cobalt Steel Square Nose End Mill, Inch, Long Length, Weldon Shank, Uncoated (Bright) Finish, Roughing Cut, 5 Flutes, 6.5" Overall Length, 1" Cutting Diameter, 1" Shank Diameter Product Specifications Mfr Part # 5210084 Number of Items 1 UPC 698464165252 Cutting Diameter 1 in Cutting Diameter 1.0000 inches Cutting Length 4 inches EAN 0698464165252 Flute Length 4 inches Number of Flutes 5 Outside Diameter 1 inches Overall Length 6.5 inches Shank Diameter 1 inches Shank Width 1 inches Tolerance Held +0.005/-0" Specification for this product family Brand Name Union Butterfield Material Type Cobalt Steel Finish Types Uncoated (Bright) Compatible Material Aluminum/Aluminum Alloys, Cast Iron, Nickel/Nickel Alloys, Plastics, Steel/Steel Alloys, Titanium/Titanium Alloys Cut Type Roughing Cutting Direction Right Hand End Cut Type Center Cutting Manufacturer Series Number 9008 Shank Type Weldon Specific Uses For Product Slot Milling , Ramping Specification Met ANSI System of Measurement Inch UNSPSC Code 27112803 Product Features Roughing end mills (also called rougher) have chip-breaking cutting edges that remove material in less time than conventional end mills Number of flutes varies; fewer flutes have more chip-carrying capacity and more flutes produce a finer finish Long-length end mills have longer cutting edges and can make deeper cuts than standard-length end mills Cobalt steel resists abrasion and high cutting temperatures, and has higher feed rates than high-speed steel Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials Product Description The Union Butterfield 9008 uncoated cobalt steel square end mill has a multi-flute design, a 30-degree helix angle, a long-length design, and fine-pitch, chip-breaking cutting edges for roughing applications that require a longer reach than standard-length end mills. The number of flutes varies; fewer flutes provide better chip-carrying capacity, while more flutes produce a finer finish. Roughing end mills are special-purpose tools whose chip-breaking cutting edges create small chips for heavy cuts and remove more material in less time than conventional end mills, with minimal vibration (chatter). The fine-pitch tooth design allows the end mill to be used to cut harder-to-machine materials. The end mill produces a rough finish that can be smoothed by a second finishing cut. The long-length design has longer cutting edges than standard-length end mills for deep slotting and applications with a high depth of cut. The cobalt steel substrate can be run at faster speeds and stays sharp longer than high-speed steel tools, while offering resistance to heat and abrasion. With no coating or surface treatment, this uncoated tool can be used on a broad range of materials. The tool’s square end creates sharp, unrounded cuts. The 30-degree helix angle supports general-purpose applications, as well as roughing applications. It balances lower angles’ strong cutting edge for difficult-to-machine materials with higher angles’ increased cutting action. The center-cutting design has cutting teeth at the end of the tool, so it can be fed into the workpiece like a drill bit; it can also be used for slotting and ramping. The cutting diameter tolerance is +0.005” to -0.000”. This tool has a Weldon shank that provides a secure hold in the toolholder and helps prevent slippage. This tool meets ANSI specification B94.19 for quality assurance. End mills are designed to remove material and create multi-dimensional shapes and profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively, the tool’s cutting edges will dull and additional material buildup can occur. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can create three-dimensional shapes and profiles, and make plunge cuts similar to a drill bit. Non-center-cutting end mills are for applications such as peripheral milling and finishing, but cannot make plunge cuts. Precision Dormer manufactures cutting tools under the brands Precision Twist, Dormer, and Union Butterfield. The company has locations around the world, and makes tools that meet to ANSI, NAS, and DIN standards. *** If you choose to pay via PayPal I will ship only to confirmed addresses and accept payment from only US accounts *** *** BID WITH CONFIDENCE, CHECK MY FEEDBACK. ***

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Material	Cobalt
Helix Angle	30° Helix
Coating	Uncoated
Cutting Diameter	1in.
End Type	Square Nose
Shank Diameter	1in.
Brand	UNION BUTTERFIELD
Overall Length	6.5"
Model	5210084
Country/Region of Manufacture	Italy
Flutes	5-Flute
UPC	698464165252