unit trap for sale, brand-new and used.

A new #1950 Barns & Jones cage unit For Durham 1/2 Series 1 (1a, 1b, 1c, 1d, 1e,) Steam Trap Interior. Complete one piece thermostatic trap interior which combines element, plug & seal. Designed to replace all the working parts of traps listed.

New cage unit for Dunham 1/2 #2,2A,2B,2E small body traps. Calibrated steam trap interior.A trap within a trap because it renews all working parts including the seat. Calibrated for uniform sensitivity.

New in box Barns & Jones 1990 steam trap interior cage unit for Dunham 1/2" #2, 2A,2B,2E small body traps. A trap within a trap because it renews all working parts including seat.

MIFAB Trap Seal Primer Distribution Unit MI-DU-625 New 5/8" Compression From the manufacturer: MIFAB's MI-DU trap seal primer distribution unit is engineered to receive a metered amount of water from a trap seal primer and distribute the water equally to either two, three or four floor drain traps. Choose from either 1/2" or 5/8" compression connections by indicating suffix (-500) for 1/2" or suffix (-625) for 5/8". The lid of the distribution unit has the numbers "2", "3" and "4" marked on it.

SquareTrade © AP6.0 Made by: SUPCO, Sealed Units Parts Company Part# DP34 Drain-Plus

3 Tested or Lightly used Steam Trap Interiors Cage Units. For Durham 1/2" Series 1 (1a 1b 1c ,1d, 1e,)

5 Min to Install, No Tools Needed Takes only a few seconds to unscrew the slip-nut from the discharge, to retrieve lost items or for maintenance.

5 Min to Install, No Tools Needed Takes only a few seconds to unscrew the slip-nut from the discharge, to retrieve lost items

5-10 Min to Install, No Tools Needed All purpose Drain trap™ body is made of 3.5 mm thick virgin polypropylene (PP), with a reinforced rib structure it can withstand 500 pounds static pressure, and PP can withstand a higher temperature then the PVC or ABS. It also is a top rated plastic

You are bidding on a new Nortec 159-9601 3/4" npt 125 psi steam trap.    It's new, no packaging, with sticker residue remaini

New/Old Stock/Unused IN Sealed Original Factory Packaging Spirax Sarco Model 1440180 Main Valve Assembly with Float for 1/2"-3/4" FT14 Trap Spirax-Sarco float mechanism with float for 1/2" and 3/4" FT-14-10, 145 pound pressure, F&T traps. Float mechanisms allow condensate to drain from the trap. The mechanism is a lever and seat operation an

Up for sale is a NEW Linear DXS-81 Supervised Bill Trap Transmitter Comes as pictured with FREE SHIPPING!! The Model DXS-81 Supervised Bill Trap Transmitter is a battery powered cash drawer bill trap with a built-in transmitter designed for use with Linear’s DXS Format receivers. This transmitter can be used in a variety of retail hold-up applications.

You are bidding on Dispos-a-trap 6100-C Disposable Evacuation Trap FilterOpen box approx 130 of 144 left in box Compatability(from Manufacturer): Most cuspidors, including A-dec, Ampco, Belmont, Dabi Atlante, Dansereau, DCI, Den-Tal-Ez, Forest, Knight,Marus, MDT, Proma, Ritter, Schein (2 1/2 ")

The PollCat NetLink Jr. Call Accounting Terminal is a highly reliable PBX data recorder, designed for SMDR/CDR data collection and alarm monitoring. The unit can be polled over a network connection, direct connect, or via modem.

Allied Iron - Bell Trap 8" X 8" X 2-3/4" OD outlet. Unit height is 4" Material: Heavy Duty Cast Iron

Allied Iron - Bell Trap8" X 8" X 2-3/4" OD outlet.  Unit height is 4" Material: Heavy Duty Cast Iron  ·         Cast Iron - Weight 8 lbs. 3 oz.

1031S - 1/2" The 1031S is equipped with a small protection screen to guard against dirt in the steam system. It is a more economical alternative than the 1041 which has a full-port strainer. Specifically designed for use in laundries.

ONE EZT-225 Overflow Cut-Off Switch For Primary and Auxiliary Condensate Drain Pans EZ-TRAP For vertical or horizontal installation. Fits outside AC unit, no access required. Enclosed float cannot be obstructed.