unloader valve air compressor for sale, brand-new and used.

Brand new compressor from trade show. I bought two, the other easily replaced TWO Hitachi compressors on my jobs. Don't really need a second one, performs twice as well as expected.

Technical Specs ItemPressure SwitchApplicationAir CompressorActuation TypeDiaphragmActionStandardRange40 to 150 psiDifferential30 psiContact FormDPSTPort Type1-Port 1/4" FNPSUnloader1/4" CompressionFactory On/Off Setting120/150 psiHP @ 1 Phase - 120V1-1/2HP @ 1 Phase - 230V2HP @ 3 Phase - 230V3HP @ 3 Phase - 460V1Series9013FHGBurst Pressure220 psiManual Switch ActionAuto/OffPhaseSingle/ThreeAC Contact Rating10A @ 575VNEMA Rating1IP Rating54Temp.

PART#: LGM20 LOAD GENIE MARK II UNLOADER CHECK VALVE. Features: Application: self contained unloading valve can be used wherever a continuous run air compressor is required. Combines all components required for continuous run compressors: pilot valve, vent valve, & check valve.

PART#: LGM20 LOAD GENIE MARK II UNLOADER CHECK VALVE. Features: Application: self contained unloading valve can be used wherever a continuous run air compressor is required. Combines all components required for continuous run compressors: pilot valve, vent valve, & check valve.

Conrader CTD3812, In-Tank Check Valve, 3/8" Compression Fitting Inlet X 1/2" Outlet, w/ 1/8" Unloader Port on Hex Check valves are used in compressed air systems to control the flow of air from the compressor into a receiver. When the compressor reaches unload pressure, the check valve closes, preventing the backflow of air from the receiver into the discharge line.

Conrader CAC1212, In-Tank Check Valve, 1/2" Inlet X 1/2" Outlet, w/ 1/8" Unloader Port on Hex C Series Check valves are used in compressed air systems to control the flow of air from the compressor into a receiver. When the compressor reaches unload pressure, the check valve closes, preventing the backflow of air from the receiver into the discharge line. Model CAC Connection Model #

Conrader CTB1412, In-Tank Check Valve, 1/4" Inlet X 1/2" Outlet, w/ 1/8" Unloader Port on Hex C Series Check valves are used in compressed air systems to control the flow of air from the compressor into a receiver. When the compressor reaches unload pressure, the check valve closes, preventing the backflow of air from the receiver into the discharge line.

WE ONLY SELL NEW ITEMS IN ORIGINAL BOX WHICH WERE OVER-PRODUCED OR SURPLUS BY ORIGINAL MANUFACTURER... NO RETURNED & NO REFURBISHED ITEMS LIKE OTHER EBAY SELLERS..

Devilbiss Air Power Air Compressor Pressure Switch D23545

Genuine Furnas Air Control Switch Model # 6MB7Y / 3X683 New & Unused Technical Specifications (69MB7Y) Switch type: air compressor Number of ports: 1 Pipe fittings: 1/4" NPT Pressure setting: 95 - 125 PSI Auto/Off lever: no Unloader valve: yes Maximum motor switching capacity: 1.5HP @ 120V / 2HP @ 230V UL Approved: yes Packed with Care and Shipped with Tracking! Thank you for reviewing my auction. Please don't hesitate to contact me with any questions you have regarding this item.

Quincy QRDS-20 single stage 20 HP oilless air compressor from medical air system. Original system system model was QRD20SBN00011. The bare shaft compressor was replaced with a new unit in 2010, estimated run time 2000 to 2500 hours.

You are bidding in to a brand new Quincy # 6671XU Valve Assembly Intake Unloader Type still in the factory box

CAMPBELL HAUSFELD REPAIR PARTS CHECK VALVE PART#: CV221502AV PAC# C5050T ALL BRASS CHECK VALVE - CLEANABLE - W/ TEFLON DISC VALVE AND PORT. HIGH QUALITY AT A LOW PRICE! Features: Construction: one piece brass body stainless steel springs glass filled fluoropolymer poppets for long term reliability Can be disassembled for cleaning & repair Valves are 100% tested for backflow leakage performance Max.

110823-325 Quncy 325 Pump Overhaul Kit Air Compressor parts

JENNY REPAIR PARTS PILOT VALVE

25 amp 115/230 volt adjustable pressure settings unloader valve on/off switch 1/4" npt air inlet ports