v bearing for sale, brand-new and used.

DRILL BITS SHARPENER GRINDER MACHINE MR-26A 12.1(8) - 26(32) MM 85 - 140 ANGLE

STRAIGHT LINE CHAMFER CHAMFERING BEVELING MACHINE 0 - 3 MM MR-R700B

DRILL BITS SHARPENER GRINDER MACHINE MR-26A 12.1(8) - 26(32) MM 85 - 140 ANGLE

DRILL MACHINE 12.1(8) SHARPENER BITS GRINDER 85 MM 26(32) 140 MR-26A ANGLE -

CURVE CHAMFER CHAMFERING BEVELING MACHINE 0 - 2.5 MM 45 DEGREE MR-R700

2 - 13 Mm Drill Bits 100 - 135 Angle Sharpener Grinding Machine Grinder MR-13A

KO LEE #11 Brown and Sharpe Taper Drive Center for Tool and Cutter Grinder + Nice clean with very smooth turning bearing, looks to have seen little use, if any Also includes; B2055H3 (6”) V-Pulley

You are bidding on an Atlas Model TH42 10" Benchtop Lathe w/ Dayton Motor –As Is This lathe runs well, has fresh paint, and has been in clean storage. Mounted on convenient heavy-duty stand. It

"Occupying a floor space of just 65" x 32.5 inches ( 1650 x 825 mm) and with an 18" x 6" (450 x 150 mm) table capable of moving 19 inches (480 mm) longitudinally and 6.75 inches (170 mm) in traverse the 540 grinder was ideally suited to most smaller toolroom jobs. The cross slide was supported on two V ways with a feed rate of 0.007" to 0.07" (0.175 to 1.75 mm) per minute at each reversal of the longitudinal stroke.

Gold International Machinery Corporation GOLDMACHINERY.COM | DGOLD@GOLDMACHINERY.COM

Gold International Machinery Corporation GOLDMACHINERY.COM | DGOLD@GOLDMACHINERY.COM

Gold International Machinery Corporation GOLDMACHINERY.COM | DGOLD@GOLDMACHINERY.COM

Item#2562- Spartan Series PA-13/2 Automatic Horizontal Bandsaw Equipped With: Standard features:

SPI Ball Bearing V-Blocks - Large Pair...Base measures 4-3/4" square x 2-1/2" overall height...Ball diameter 1-1/2"...Capacity range 3/16" - 15"...Weight capacity 2000 lbs...Includes extra ball...Excellent condition

SPI Ball Bearing V-Blocks - Pair - NEW with extra ball. Very short listing. Will not be available until early summer if it does not sell by JAN 3rd.

Tricks & Secrets of Old-Time Machinists: Hints and Kinks Provided by the Readers of American Machinist Magazine in 1915 and 1916, Volume 2, originally published in American Machinist Magazine, compiled, edited and published by Lindsay Publications, 2008. 5 1/2 x 8 1/2 paperback, 96 pages. ISBN 1-55918-371-3.

Tricks & Secrets of Old-Time Machinists: Hints and Kinks Provided by the Readers of American Machinist Magazine in 1915, originally published in American Machinist Magazine, compiled, edited and published by Lindsay Publications, 2009. 5 1/2 x 8 1/2 paperback, 96 pages. ISBN 1-55918-383-7.

K.O. LEE Universal Tool & Cutter Grinders Operators Manual 127 pages paacked with diagrams. This Manual is delivered on CD-Rom in Hi-Resolution for quality prints.