vise 4 inch for sale, brand-new and used.

5" Drill Press Vise Features: eliminates need for special and expensive jigs and fixtures provides maximum clamping and holding power steel jaw faces cold rolled steel screws swivel crank handles drops out of way jaw with 5", jaw depth 1", jaw opening 4" jaws are replaceable and interchangeable

This is a Vintage Ridge ( predecessor to Ridgid ) 4" utility bench vise. Opens 5 inches with screw still fully engaged, can go more. Very minor wear, sat on a shelf for many years.

var itemNumber = window.ebayItemID ?

Iron Parrot Vise 360 Degree Swivel Mechanism Lay Vise Flat Jaw Holes Woodwoker Iron Parrot Vise Product Description: This unique Iron Parrot Vise swivels a full 360-degrees and then locks in place when the jaw is tightened. This handy Iron Parrot Vise can be used in nearly any position for a range of applications. Capable of clamping in the upright position, side-to-side or at any angle.

For sale: A set of (two) low profile vise stops made from aluminum 6061 and fitted with stainless hardware. This stop can be used from the left or right hand side. The pins are both set BELOW the vise jaw.

FastBack Interchange System Based around the patented FastBack Bolt, this quick-change system allows the jaw to be changed in 3 strokes! This greatly increases productivity by reducing vise change setup time. rnrn The jaws change easily without opening the vise or fastening bolts mo

Wilton 4 inch milling machine vise model 11602. This vise is in great shape. Will ship in the US only for $12.00 priority mail.

This auction is for 1 Standard 6" Billet aluminum Machined vise stop. (DIMENSIONS FOR FITMENT) This vise is designed to mount onto the back of a 6" standard vise. This means brands like KURT, GLACERN, and any other standard 6" vise with 3.875" spacing from center to center of holes, and uses a 1/2-13 thread.

4 inch / 100 mm Cast Iron Cross Slide Vise by White Dog & AJ Wholesale Dist. Ex+ Clamps work tight for easy yet careful position adjustment Support a no-kill animal shelter by giving this "White Dog" a second chance with this charity auction :) Close to new. But this is an inexpensive met

Proxxon precision machine vise for use with MF70 number 37110 micro mill or compound table KT70 number 27100. Comes with slot stones and fixing screws for convenience. Total length 2-3/4-Inch jaw width 1-13/16-Inch for clamping capacity of 1-13/16-Inch.

Shop Fox D2933 Angle Vise 4-1/8-Inch Wide 3-3/4-Inch capacity Full 90 Degree adjustment Indexing pin set every 15 degree, dovetailed trunnions Precision-cut acme threads, polished guide rod This Angle Vise offers a full 90 Degree adjustment from horizontal to vertical with easy-to-read scale and indexing pin set for every 15 Degree. Dovetailed trunnions with lock handle ensure stability and precision-cut Acme threads and polished guide rod ensure accuracy. Capacity is 3-3/4-Inch.

Here is a pair of vise step jaws for 4” Kurt and Kurt type Angle Lock style vises. The jaws are .500 thick, 1.300 high, and 4” long. The steps are .090 by .300 The rear jaw has a removable stop that can be mounted at either end The mounting holes line up perfectly with my REAL Kurt 4" Angle Lock Vise.