Waveguides Adapters & Terminators (Spare Parts, Additional Accessories & Plug-Ins) for sale, page 132

F127 3.84 ghz bandpass filter, 45 mhz wide sma type, tested w/plot

Morehead, Kentucky, United States
Jan 29th

I removed this from a CBand point to point terminal front end, swept it and found it is a nice little SMA filter covering 3840 MHz with approximately 45 MHz of bandwidth <2.5 dB loss. It is tuneable and looks like you could improve the loss with a bit of tweaking, as one pole seems to have slipped to the side a bit. Comes with test plot.

F129 1500-2000 mhz sma coax bandpass filter tested w/plot

Morehead, Kentucky, United States
Jan 29th

Removed from a special purpose Microdyne Microwave receiver system, I swept this filter, marked 1.5-2.0 GHz and found it has -3 dB pts at 1.44 and 2.14 GHz, SMA male connectors on cables, <.5 dB insertion loss in band. Comes with test plot. Have fun!

F132 2.45-2.7 ghz sma coax bandpass filter tested w/plot

Morehead, Kentucky, United States
Jan 29th

Removed from a special purpose Microdyne Microwave receiver system, I swept this filter, marked 2.45-2.7 GHz and found it has -3 dB pts at 2.345 & 2.736 GHz, SMA male connectors on cables, <.5 dB insertion loss in band. Comes with test plot. Have fun!

F130 1.56-1.76 ghz tnc coax bandpass filter tested w/plot goes/hrpt sat band

Morehead, Kentucky, United States
Jan 29th

Nicely made Bandpass filter with -3 dB points of 1.56 &1.76 GHz, straddles Goes/HRPT band, made by Microlab/FXR for Uncle Sam, low loss in midband <.5 dB. Uses TNC male connectors. Comes with test plot.

F135 reactel 153.6 mhz bnc coax bandpass filter, .8 mhz wide, tested w/plot

Morehead, Kentucky, United States
Jan 29th

Nicely made Bandpass filter at 153.6 MHz, -3 dB corner at .8MHz wide (!), made by Reactel, looks Gaussian shaped, like maybe for noise measurement tests. Uses SMA connectors. Comes with test plot.

Commscope snap in for waveguide cable. part# ewsh-63. qty-10

Chicago Heights, Illinois, United States
Jan 29th

FOR SALE IS 1 BOX OF 10 COMMSCOPE EWSH-63 HANGER KIT. (HAVE OTHER TYPES & RELATING ITEMS AVAILABLE) The EWSH series snap-in hanger kits feature a cushion to further protect the waveguide and provide additional dampening. The hangers are designed to be installed into 3/4" holes in support structures 0.120 to 0.150 inch thick.

Rf sweep signal generator 92 - 95ghz ( w band ) wr10 micro-new 716 waveguide out

Ashkelon, default, Israel
Jan 29th

RF SWEEP SIGNAL GENERATOR 92 - 95GHz ( W BAND ) WR10 MICRO-NEW 716 WAVEGUIDE OUT VERY HARD TO FIND ITEM. SOLD AS IS. MANUAL INCLUDED.

Wr22 waveguide assy trg 07397 09-1929305 33 - 50ghz

Ashkelon, default, Israel
Jan 29th

WR22 WAVEGUIDE ASSY TRG 07397 09-1929305 33 - 50GHz FULLY TESTED. GOOD WORKING CONDITION. ACTUAL PHOTOS.

Wr28 to k connector waveguide adapter wa28k 26.5 - 40ghz

Ashkelon, default, Israel
Jan 29th

WR28 TO K CONNECTOR WAVEGUIDE ADAPTER WA28K 26.5 - 40GHz MADE IN USA, DORADO WA28K WR28 ADAPTER. FULLY TESTED. GOOD WORKING CONDITION.

Waveguide directional coupler - wr-90, 8.2 - 12.4 ghz

Compton, California, United States
Jan 29th

Waveguide Directional Coupler - WR-90, 8.2 - 12.4 GHz A Waveguide Dire

Teledyne microwave ws-12p11-13 waveguide switch - 3-port, wr-62, 12.4-18 ghz

Compton, California, United States
Jan 29th

Teledyne Microwave WS-12P11-13 Waveguide Switch - 3-Port, WR-62, 12.4-18 GHz

Hp j810b, slotted section used on j band frequency, operational..

Garland, Texas, United States
Jan 29th

HP J810B SLOTTED LINE.WR137 WAVE GUIDE ,FEQUENCY RANGE 6.3 GHZ TO 8.2 GHZ. UNIT OPERATIONAL. SHIP USPS PARCEL POST IN THE USA, OVERSEAS SHIP USPS AIR,,ACCEPT PAY PAL OR CASHIERS CHECK..

Hnl wr62 straight waveguide sections

Silverdale, Washington, United States
Jan 29th

This auction is for a pair of WR42 straight waveguide sections. The manufacturer is HNL with a part number of K-112.8.0. The frequency range is 18 - 26.5 GHz.

Narda microwave 3004-10 4.0-10.0ghz 10db microline coaxial directional coupler

Chatsworth, California, United States
Jan 29th

Narda Microwave 3004-10 4.0-10.0GHz 10dB Microline Coaxial Directional Coupler "The 3004-10 from Narda Microwave is a Directional Coupler with Frequency 4000 to 10000 MHz, Coupling 10 dB, Directivity 20 dB, Average Power 200 W, Insertion Loss 0.85 dB" Instruction manuals, additional peripherals, and any other components NOT included. Please call me direct if you have any questions. (818) 407-0990 Local Pick Up is welcome.

Wr22 waveguide horn antenna 33 - 50ghz ( can be used with 11970q mixer )

Ashkelon, default, Israel
Jan 29th

WR22 WAVEGUIDE HORN ANTENNA 33 - 50GHz ( CAN BE USED WITH 11970Q MIXER ) WR22 HORN ANTENNA, ONLY THE ANTENNA INCLUDED. MIXER NOT INCLUDED. ANTENNA IN GOOD WORKING CONDITION.

Waveguide ka band x4 frequency multiplier 33.8ghz - 40ghz wr28 radar

Ashkelon, default, Israel
Jan 29th

Waveguide Ka Band Multiplier x4 33.8 - 40GHz WR28 (+ 34.3GHz ) Radar transmitter GOOD WORKING CONDITION , FULLY TESTED. * SEE THE VIDEO AT END OF PAGE ! ** This x4 Active Multiplier will multiply signal from 8.5 to 10GHz at input TO 34 - 40GHz at output !

Flann microwave waveguide wr19 to wr22 adapter taper 40-60 ghz fmi

Anconetta, Italy
Jan 29th

FMI FLANN MICROWAVE WR19 to WR22 adapter

Waveguide assembly: 6.0 -6.7 ghz

Raleigh, North Carolina, United States
Jan 29th

Waveguide assembly: 6.0 -6.7 GHz

Flexible waveguide: m1640-03-36-n-03-03-u

Raleigh, North Carolina, United States
Jan 29th

Flexible Waveguide: M1640-03-36-N-03-03-U

Microtech flexible 20" x-band waveguide & flanges, 8.2 to 12.4 ghz

Red Bank, New Jersey, United States
Jan 29th

for more great deals on waveguides and other electronic components. Thank you for your interest in this MICROTECH FLEXIBLE X-BAND WAVEGUIDE. It is a high-quality piece of equipment that is perfect for a variety of applications.