weldon end mills for sale, brand-new and used.

This thing looks like it was never used but ready to be put to work, a Weldon F79 HSS, Right hand cut and 6 flute Rougher, Measures 2.000 and has a 3/8 corner radius end. 2" shank and 4.50 LOC. Weigh's 6 Lbs.

New old stock. Weldon center cutting 4 flute end mill PAC 24-5 3/4" dia 3/4" shank flute length 1 5/8 " Weldon Crest Kut 1/2" dia 1/2" shank 4 flute end mill

New old stock (1) Weldon long end mill RH cut RH Spiral 1/2" dia 1/2" shank 4 flutes AL 1-3 and Weldon cupped end mill RH cut RH shank 4 flute AL 8-2

Welcome!!! You are buying a Niagara Cutter 75349 Cobalt Steel Chamfer Mill, Extra Long Length, Angle, Long Reach, Inch, Weldon Shank, Uncoated (Bright) Finish, Roughing Cut, 30 Degree Helix, 6 Flutes, 6.5" Overall Length, 1.250" Cutting Diameter, 1.250" Shank Diameter

YG-1 E2053 Cobalt Steel Square Nose End Mill, Double End, Weldon Shank, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 3.375" Overall Length, 0.265625" Cutting Diameter, 0.375" Shank Diameter Features Double-end square end mills create sharp, unrounded cuts and have cutting edges on both ends for longer tool life Four flutes produce a better finish than fewer flutes

Niagara Cutter 40101 High Speed Steel (HSS) Square Nose End Mill, Inch, Weldon Shank, Uncoated (Bright) Finish, Roughing and Finishing Cut, 30 Degree Helix, 4 Flutes, 2.5" Overall Length, 0.313" Cutting Diameter, 0.375" Shank Diameter Features Number of flutes varies; fewer flutes have more chip-carrying capacity and more flutes produce a finer finish High-speed steel is compatible with a var

HSK100 7/8" End Mill Holder Din 69883 Form A- Made in Germany by KELCH HSK Tooling is known for it’s superior rigidity and higher spindle speeds. For end mills with

USED AND SHOWS SIGNS OF WEAR (SEE PHOTOS). Indexable High-Feed End Mills; Cutting Diameter (Decimal Inch): 1.2500; Maximum Depth of Cut (Decimal Inch): 0.0430; Shank Type: Straight Shank; Shank Diameter (Decimal Inch): 1.2500; Number of Cutter Inserts: 4; Insert Style: H600 WXCU 05 Cutting Diameter (Decimal Inch) 1.2500 Maximum Depth of Cut (Decimal Inch) 0.0430 Shank Type Straight Shank

TO

2 end mills for this auction. Both are 1" diameter with 4 flutes. See pics for more details.

Niagara Cutter N23140 High Speed Steel (HSS) Square Nose End Mill, Inch, Weldon Shank, TiN Finish, Roughing and Finishing Cut, 30 Degree Helix, 2 Flutes, 3.6875" Overall Length, 0.438" Cutting Diameter, 0.375" Shank Diameter Features Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool's ability to remove material Titanium nitride (TiN) is a gener

Niagara Cutter N35280 High Speed Steel (HSS) Square Nose End Mill, Inch, Weldon Shank, TiN Finish, Roughing and Finishing Cut, Non-Center Cutting, 30 Degree Helix, 4 Flutes, 4.125" Overall Length, 0.875" Cutting Diameter, 0.875" Shank Diameter Features Number of flutes varies; fewer flutes have more chip-carrying capacity and more flutes produce a finer finish Titanium nitride (TiN) is a gene

TO

This Listing is for ONE(1)

6.20 Pounds lbs. list from left to right1 1/8 red arrow w-535-80-18666 260345-t-3 The cutting edge is opposite of standard IE left Hand drill 4 flute in good condition3/4 HSS double end 4 flute good conditionartisan .8765 four flute fair conditionartisan .8765 four flute fair/good conditionweldon 7/8 four flute fair conditionputnam hispad .538 two flute has chip on cornerBrubaker 1.0 HNA K4 two flute good condition Check out our Ebay page for more great machinist items/tools.

This Listing is for ONE(1) Lot of 41 assorted Single and Double end HS End Mills Cutters

Spiral flute keyway style end mills are designed to cut to size and have a minus tolerance. By lifting the chips they can mill deeper keyway channels. Keyway end mills for close tolerance keyway milling: Minus tolerance +.000 to -.0015 YOU COULD FACE OR SIDE MILL WITH THESE AS WELL END MILL DOES NOT KNOW THE DIFFERENCE HIGH SPEED END MILL CONDITION = NEW HIGH SPEED END MILL MANUFACTURER = MELIN {USA} HIGH SPEED END MILL DIAMETER = 31/32" {.9062"} HIGH SPEED EN

Spiral flute keyway style end mills are designed to cut to size and have a minus tolerance. By lifting the chips they can mill deeper keyway channels. Keyway end mills for close tolerance keyway milling: Minus tolerance +.000 to -.0015 YOU COULD FACE OR SIDE MILL WITH THESE AS WELL END MILL DOES NOT KNOW THE DIFFERENCE HIGH SPEED END MILL CONDITION = NEW HIGH SPEED END MILL MANUFACTURER = MELIN {USA} HIGH SPEED END MILL DIAMETER = 1" {.9062"} HIGH SPEED END M

Spiral flute keyway style end mills are designed to cut to size and have a minus tolerance. By lifting the chips they can mill deeper keyway channels. Keyway end mills for close tolerance keyway milling: Minus tolerance +.000 to -.0015 YOU COULD FACE OR SIDE MILL WITH THESE AS WELL END MILL DOES NOT KNOW THE DIFFERENCE HIGH SPEED END MILL CONDITION = NEW HIGH SPEED END MILL MANUFACTURER = MELIN {USA} HIGH SPEED END MILL DIAMETER = 29/32" {.9062"} HIGH SPEED E