1 2 ton arbor press for sale, brand-new and used.

Wilton & JET Equipment 333650 - Arbor Press 5 Ton For all Production and assembly applications. Precision cut steel rams and pinions for accurate operation. Tables and slotted table-plates are flat and parallel to provide accurate support.

var itemNumber = window.ebayItemID ?

Dake Arbor Press no 1 1/2 in great condition and working order. Just dusty from storage. Comes with the pedestal.

Note regarding fit: Measure your inside, front to back, bed gap. These 4 bars are intended for stand alone use on 20 ton presses with, front to back, gap of about 4.25". Your No.

Sale is for One (1) USED JET PRESS MODEL MAP-2 ARBOR PRESS 2 TON BENCHTOP LEVER PRESS Item has light scratches shown in the photos This press only comes with what is shown in the photos The one shown in the photos is the one you receive Specs; Manufacturer-

This 4 pc set is now being offered with our PREMIUM X-BARS. Note regarding fit: Measure your inside, front to back, bed gap. These 4 bars are intended for stand alone use on 20 ton (or less) presses with, front to back, gap of about 4.25 inches.

Totally restored Famco #1 3/4-ton rated arbor press. This is the third one I've done and I know these presses inside and out. The unit has been stripped down to smallest individual parts, de-greased, de-rusted with a chelating solution for long-term protection, primed, and painted with high temperature VHT wrinkle paint on all surfaces including the bottom, then oven-cured at 175° for two hours for a durable finish.

Totally restored Famco #1 3/4-ton rated arbor press. This is the third one I've done and I know these presses inside and out. The unit has been stripped down to smallest individual parts, de-greased, de-rusted with a chelating solution for long-term protection, primed, and painted with high temperature VHT wrinkle paint on all surfaces including the bottom, then oven-cured at 175° for two hours for a durable finish.

Totally restored Famco #0 1/2-ton rated arbor press. This is the third one I've done and I know these presses inside and out. The unit has been stripped down to smallest individual parts, de-greased, de-rusted with a chelating solution for long-term protection, primed, and painted with high temperature VHT wrinkle paint on all surfaces including the bottom, then oven-cured at 175° for two hours for a durable finish.

Sale is for a 2 Ton Phase 2 Arbor Shop Press. This unit was purchased for our shop several years ago, but never used. It has been stored on a shelf and has some rust, dust and shelf wear.

This is a used but well cared for very Heavy Duty Arbor Press. Famco list it as a 3 ton with a 50 - 1ratio. It weighs 160 lbs and the dimensions are 8 inches wide by 18 inches deep and 21 1/2 inchestallI have it listed for local pickup, but I will work with the buyer through a shipping broker to crate and/or palletise the press.

Product Overview:Dake Arbor PressGrand Haven Model- 2 1/2 (202) Steps up the pressure for heavier press work. These Arbor Presses with a compound leverage mechanism features a sliding pin, rack and pinion table adjustment. Product Features:Compound levera

Dake Y Model Single Leverage Arbor Press with Solid Plate, 1.5 Ton Capacity, 7.75" Maximum Working Height, 6" Length x 15" Width x 14.5" Height

20 TON Finger Brake Press "Fully Welded" Designed to fit the Harbor Freight 20 ton hydraulic press Item # 32879

We can not keep this deal up forever. If this set is something you can use please buy it now to prevent disappointment. This 4 Piece Set is made for 20 ton shop presses front to back bed gap of 4.25 inches.

4 piece set consisting of a pair of hefty “universal” press bars for 30 to 40 ton presses PLUS a pair of PREMIUM X-BARS to cut unit loading of workpiece by at least half. Our X-BARS, BIG BARS and Press Plates are proudly used around the country by: Farm, Aviation, Auto and Heavy Duty shops, plus Racers, Marinas, Machine Tool, Industrial and Hobbyists of all descriptions. Where ordinary 20 ton plates are to short or to weak, these

Thousands of Used Metalworking and Plastic Machines & New Machine Tools Photos, Full Descriptions and Prices - Fast & Easy

DAKE ARBOR PRESS. Model Y 1.5 ton in good shape. email for shipping quotes.

HERE IS A NICE WORKING FAMCO ARBOR PRESS. THIS PRESS CAN BE INSPECTED IN MPLS MN. TO SET UP AN INSPECTION, PLEASE CALL JIM @ 952-931-7974.