1 2 ton arbor press for sale, brand-new and used.

These bars were designed for use on our 1 Ton Palmgren arbor press where they easily support 2000 lbs. over the anvil wheel slot span of less than 1.25”. They are also useful as bench blocks, shims, and set-up blocks.

These 3 Ton Press Bars used flat (4 Ton used on edge), measuring 1/2" X 3/4" X 4.25, were designed for use on a 3 ton arbor press where they support 6000 lbs. over the anvil wheel slot span of 2” or less. These FULLY GROUND matched bars are handy for other uses such as set-up blocks and shims.

We have 4 of these stocky little bars (THE GUY S IN THE BACK CALL THEM "BITTY BARS")measuring 1"X3/4" X 4.25”, in our shop. They were designed for use on our 6 Ton Famco arbor press where they easily support 12000 lbs. over the anvil wheel slot span of less than 2.75” They often find themselves over on the 30 ton “H” frame press as set-up blocks, blocking, or load spreading blocks in heavy load situations.

Up for sale is a FAMCO ARBOR PRESS MODEL A. I believe it is 1/2 ton capacity. 3/4" square ram.

Your No. 1 Choice for Press Accessory Solutions We have 6 of these stocky little bars (THE GUY'S IN THE BACK CALL THEM "BITTY BARS") measuring 1" X 3/4" X 4.25”, in our shop. They were designed for use on our 6 Ton Famco arbor press where they support 12000 lbs.

These bars were designed for use on 2 Ton arbor presses where they easily support 4000 lbs. over the anvil wheel slot span of less than 1.42”. They are also useful as bench blocks, shims, and set-up blocks.

DescriptionMount this hand-operated arbor press onto your workbench to handle smaller production and assembly jobs such as installi

Wholesale Direct Auto Parts

This is a used but well cared for very Heavy Duty Arbor Press. Famco list it as a 3 ton with a 50 - 1ratio. It weighs 160 lbs and the dimensions are 8 inches wide by 18 inches deep and 21 1/2 inchestallI have it listed for local pickup, but I will work with the buyer through a shipping broker to crate and/or palletise the press.

Mount this hand-operated arbor press onto your workbench to handle smaller production and assembly jobs such as installing and removing bear

OUT OF BOX ARBOR PRESS, APPEARS UNUSED. COMPLETE AND IN PERFECT SHAPE015-02-04-17-653 PLEASE READ BEFORE BIDDING: NO RETURNS description information above supersedes any return or condition info in the data below: BEFORE MAKING YOUR PURCHASE Contact me for freight cost (applies only to items shipped by truck freight)

Mathews Engineering Spare Arbor Rack for Central Machinery & Harbor Freight model 03552 1 Ton Arbor Press PART NUMBER: APSA1 Arbor dimensions: 0.975" x 0.975" x 9-1/2" Material: 1018 Cold Finished Steel Tooth Pitch: 0.3085" (~ 3.24 TPI) Tooth Whole Depth: 0.192" These arbors are machinable so it is easy to drill & machine the ends for making dedicated arbor press set ups. INCLUD

var itemNumber = window.ebayItemID ?