THIS AUCTION IS FOR ONE NEW 12" LINEAR MOTION TABLE Approx 12" travel SFU 1605 ball lead screw SFU1605 ball nut Dual thrust bearings minimize leadscrew end-play and backlash 1/4
I have a custom designed motorized vertical stage which was designed as an wafer boat elevator for a semiconductor wafer inspection system. Less than 7 pounds. High quality 13 TPI ACME screw, 2.5:1 belt drive reduction, and self lubricating nut and recirculating ball bearing guides.
Thomson DSRC-12 Linear Bearing Slide DSRA-12 Dual Shaft 12" Rail Please refer closely to all the photos before purchasing. Used Appears in good, clean shape. Should have little actual use as these were setup for feet positioner on a piece of equipment.
Thomson DSRC-12 Linear Bearing Slide DSRA-12 Dual Shaft Rail 12" Please refer closely to all the photos before purchasing. Used Appears in good, clean shape. Should have little actual use as these were setup for feet positioner on a piece of equipment.
Nice Large Synchro with gear box assembly. This item came from the estate of a silent key and his family thought it may have been a WWII surplus assembly that was used in conjunction with his ham radio antenna tower, but they were not sure. The unit is quite heavy duty with a 1/2 ” diameter output shaft that is about 1.125” long.
Complete Dry Type Transformer Temperature Monitoring, Control, & Cooling System Transformer Temperature Monitoring and Control System TEMPERATURE MONITORING & CONTROL OF MV DRY TYPE AND CAST RESIN TRANSFORMERS LIST PRICE FOR ALL COMPONENTS NEW IS $2,500+ Removed from 1500kVA 3-phase transformer manufactured in 2006 All components operational when removed. Note: Bars that fans are mounted shown in picture will not be shipped with this package.
This listing is for a brand new LEESON 1-1/2HP Agricultural Duty Feed-Auger Drive motor #113280. This motor is still in the box with the original packaging. Due to the weight of this motor, the freight carrier needs your contact number.
This listing is for a brand new LEESON 1-1/2HP Aeration Fan Rigid Base motor #111949. This motor is still in the box with the original packaging. Due to the weight of this motor, the freight carrier needs your contact number.
This listing is for a brand new LEESON 1/2HP General Purpose C Face with Base motor #102907. This motor is still in the box with the original packaging. Due to the weight of this motor, the freight carrier needs your contact number.
This listing is for a brand new LEESON 1HP Agricultural Duty Rigid Base motor #113938. This motor is still in the box with the original packaging. Due to the weight of this motor, the freight carrier needs your contact number.
This listing is for a brand new LEESON 1HP Agricultural Duty Feed-Auger Drive motor #113906. This motor is still in the box with the original packaging. This is a generic picture of a Agricultural Duty motor.
This listing is for a brand new LEESON 1-1/2HP Agricultural Duty C Face Less Base motor #110495. This motor is still in the box with the original packaging. Due to the weight of this motor, the freight carrier needs your contact number.
This listing is for a brand new LEESON 1/3HP Feed-Auger Drive motor #102016. This motor is still in the box with the original packaging. Due to the weight of this motor, the freight carrier needs your contact number.
115 Volt 1075 RPM 1 HP 12.9 Amps 3 Speed Ball Bearing Rotation: CCW Lead End (CW Shaft End) Shaft Dimension: 1/2 x 3 1/2" "A" Dimension (motor length): 5 7/8" Motor Diameter: 5 5/8" Open Air Over Enclosure Insulation Class: B CCW Rotation Ambient Temp.: 40C Single Phase Service Factor (SF): 1.0 15MFD/440V Capacitor Required
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
