3-6 volt motor for sale, brand-new and used.

BRAND NEW, UNUSED, UNDAMAGED Kay Industries Model MP-501 Heavy Duty MiniPhase Static Phase Converter for 2-5HP 3600RPM motors. Retails for $385. In original box, but seal has been broken.

NES1-004LB Inverter, 200-240 volt, 3 phase, 1/2 HP, 2.6 Amps

I have 6 Brand New Schneider Electric motor circuit breakers. These are brand new from the factory parts. Part GV2 P16 TeSys 021350 These are new parts in original unopened boxes.

Up for auction is a used DC motor controller for NEV’s (Neighborhood Electric Vehicles). It has been tested and appears to be fully functional. This unit is a prototype that was originally designed to run high voltage NEV's (96 to 250 volt).

*****************NEW NEVER USED BUT DO NOT HAVE ORIGINAL BOX**************** PERFECT CONDITION JUST NO ORIGINAL BOX NOTE: Heat sink is required on this model for the following applications 3/4 and 1 HP 90 Volts All 1.5 and 2 HP Catalog Number: 174307.00 Description: DC SCR CONTROL - NEMA1 ENCLOSED Input Voltage: 115/230VAC Output Voltage: 90/180VDC Output Current: 10 Amps HP Range: 90V (1/8-1) / 180V (1/4-2) Direction: NON Reversing Enclosure: NEMA 1 Ship Weight: 6 lbs.

· The Item is being sold AS-IS but was removed from service in a working condition, but not tested since. I have 3 total of these, but this auction is for ONE only. The description below is from the manufactures website and is a current product.

The items are USED and sold AS-IS, but were removed from service in a working condition. Below are the detail from the manufacturers page and I believe all products are current. Stepper Motor The HT34-490 two-phase stepper motor is designed for use with the STAC6 series of stepper drives (120 VAC input versions only) and is suitable for a wide range of motion control applications.

This listing is for one (1) very slightly used if at all Bodine Electric gear motor 1/6 Hp, 115 volts, 1 Ph, 1.9 amps, 20:1 ratio, 85 rpm, TEFC. Type # 42R5BFCI-E3 Ser# 0681HNOA0021. The shaft is 3/4" diameter 1 1/2" long.

Here we have a new old stock electric motor by Magnetek. This motor is a very heavy duty motor running on 440 volt 3 phase. It is a 3 hp motor running 850 rpm 60 hz and 5.0-6.0 amps.

Baldor RL1205A

YOU ARE BIDDING ON Pool Pump Motor, Permanent Split Capacitor, Open Dripproof, 3/4 HP, 3450 Nameplate RPM, 56C NEMA/IEC Frame, CCWSE Rotation, Voltage 115/230, 9.6/4.8 Full Load Amps, 1 Phase, 60 Hz, Face Mounting, Double-Sealed Ball Bearings, Black, Shaft Keyed, Thermal Protection Auto, 1.50 Service Factor, Ambient Temperature 50 Degrees C, Shaft Dia.

Motenergy ME1004 PMDC Motor, 24-48V, 10.75 hp cont, 21 hp pk This is a Permanent Magnet, Brush Type, DC Motor with Neodymium Iron Boron Magnets. The 1" shaft is similar to the shaft on most Lawn and Garden Tractor engines. This motor is perfect for an engine replacement on a Lawn and Garden tractor when converting the

G.E. motor, 3/4hp, GE, .75 hp, 1140 rpm, 48Z frame, 230/460 volts, 200-230/460vac, 3.3-3.8/1.9 amps, 3 phase, 60 hz, ODP, catalog #5K39SN152S, 5K38SN152S, 5K39SN152S, 5K39SN152, 48Z frame, HVAC mounting, .75hp, 1140rpm, 1170 rpm, 1140, 1170, 1200 rpm, 6 pole, 1140rpm, 1170rpm, 48Z frame, G.E., General Electric, .75hp, 3/4 hp, 3 ph, 1140rpm, .50HP, G.E.

up for sale 3 Phase Open Dripproof Motor, HP 3/4, RPM 3450, Voltage 208-230/460 V, NEMA Frame 56C, Service Factor 1.25, Frequency 60 Hz, Efficiency 75.5, Mounting C-Face, Bearings Double Shielded Ball, Thermal Protection None, Full Load Amps 2.6-2.4/1.2 model # 1z958

AVAILABLE FOR SALE HERE ARE THE SPECS : Motor Application Pumps Motor Sub Application Jet Pumps Motor Type Capacitor-Start Enclosure Open Dripproof HP 1/2 Nameplate RPM 3450 Frame 56J Rotation CCW Voltage 115/230

UP FOR SALE MOTOR , HERE ARE THE SPECS : Motor Application

WarnerSales Warner See all my listings: WarnerSales

Selling motor at below cost in order to get it off the shelf. Customer ordered but never picked up. Horse Power: 2.0 Amperes: 6.0-5.6/2.8 Frequency: 60 RPM: 3450 Voltage: 208-230/460 Motor Type: SC Frame Size: M56HC Nema Suffix: HC

3 HP MOTOR FROM ACCURA 02020 20" WOOD CUTTING BANDSAW This motor was taken from a machine that we sold to an Amish customer. They run their machines with belt power from a stationary diesel engine and do not need the motor. So we pull the motor, give them a discount and put the motor out there for some one who DOES need a motor.