3 of 3200 for sale, brand-new and used.

SKU:*flz-120514-011 2M420 is a cost effective, high performance bi-polar two phase micro-stepping drive applying pure-sinusoidal current control technique. It is best suited for the applications that desired extreme low noise and heat. It operates well in an environment, where electricity supply experience instability and fluctuation.

Spartan Rotron fan with start capacitor, on-off swith, and 4 foot ac(115 vac) cord installed. Fan runs 3200 rpm, continuos duty, Checked Good.Preferences§12

Overview The MA860H is a high performance microstepping driver based on pure-sinusoidal currentcontrol technology. Owing to the above technology and the self-adjustment technology (self-adjust current control parameters) according to different motors, the driven motors can run with smaller noise, lower heating, smoother movement and have better performances at higher speed than most of the drivers in the markets. It is suitable for driving 2-phase and 4-phase hybrid stepping motors.

Key Features High performance, cost-effective Supply voltage up to 50DC Output current up to 4.5A Self-adjustment technology Pure-sinusoidal current control technology Pulse input frequency up to 300 KHz TTL compatible and optically isolated input Automatic idle-current reduction 16 selectable resolutions in decimal and binary, up to 51,200 steps/rev Suitable for 2-phase and 4-phase motors Support PUL/DIR and CW/CCW modes Short-voltage, over-voltage, over-current protections

Single Axis TB6600 0.2-5A CNC Engraving Machine Driver Controller Stepper Motor

Single Axis TB6600 0.2-5A CNC Engraving Machine Driver Controller Stepper Motor

Brand New High Performance NEMA23 Stepper Motor CNC Driver 2M542 4.2A Controller

Single Axis TB6600 0.2-5A CNC Engraving Machine Driver Controller Stepper Motor

OMEGA MODEL 2003 EB-3200-0001 CONTROLLER

International Instruments Panel Meter DCMA NSN: 6625-00-720-3181 - New Lot of 2

1 pcs XBP24-Z7UIT-004 model Default setting: 9600 baud XBee-PRO (Series 2)

You are bidding on (5) Dunkermotoren Gleichstrom governor controlled DC permanent magnet motors with the following specs; type GK26/400R, rated 3-30 vdc, governor control adjustable 2850-3200 rpm, 20 ma max continuous torque 85 pcm, stall torque 5 oz-in, speed without governor 20,000 rpm @ 350 ma, body dimensions 1 inch diameter X 2.8 inches long without shaft & shaft diameter 0.080 X 0.375 long.

var itemNumber = window.ebayItemID ?

The Hickok 533 and 533A are different. I also have the 533A manual listed on Ebay. This is a very nice comb-bound laser reprint of the owners manual for the Hickok 533 tube tester.