air foot pedal for sale, brand-new and used.

Up for auction, one gently used, Royal Products Pneumatic 5C Collet Closing System, for use on any manual tool room lathe. System comes complete and ready to install; just add your choice of open/close switch-lever action, foot pedal, or even solenoid. Easily installs in minutes.

EAGLE ROCK 5C AIR COLLET, FOOT PEDAL WITH GAURD AND COMPRESSED AIR REGULATOR. I HAVE NO HISTORY WITH THE DEVICE. I TESTED WITH COMPRESSED AIRLINE CONNECTED AND IT OPENS AND CLOSES WITH FOOT PEDAL CONTROL.

HI YOU ARE LOOKING AT A PNEUMATIC VISE ATTACHMENT FITS A 6 INCH KURT ANGLE LOCK OR IMPORT ANGLE LOCK TYPE VISE. TO LOOSEN OR TIGHTEN THE VISE BY SIMPLY MOVING THE HANDLE. BOLTS TO THE BACK OF THE VISE WITH 2 SCREWS ( REQUIRES YOU TO DRILL AND TAP TWO 1/4-20 HOLES IN THE BACK OF YOUR VISE INSTALLATION INSTRUCTIONS AND MOUNTING HARDWARE INCLUDED ) EASY INSTALLATION ENABLES YOU TO INSTALL TO USE AS A POWER VISE OR UNINSTALL TO USE AS A MANUAL VISE.

Piston Filling Machine with Stainless steel Portable Great system for filling light to thick viscosity liquids such as creams, oil, shampoo, conditioner, sauces, salad dressings, soups and much more. This equipment is used but in fair to good condition selling for half the price it was originally sold for! The tank has a small leak, only shows with thin liquids like water, the leak is where the cone tank meets the tip, it can be welded easily.

CONTROL LOGIC: Motorola 68000 Microprocessor MEMORY: Battery back-up RAM DATA ENTRY: Selector switch Z TOOL RANGE: 0.5 inch Z ENCODER RESOLUTION: 0.001 inch BOND FORCE RANGE: Adjustable, 10 to 150 grams TRANSDUCER: 1/2 wave, 63 KHz (nominal) ULTRASONICS: Built-in, 8 bit, 4 watts (Ultrasonic Positioning Utility) WIRE RANGE: 0.7 to 2.0 mils, 1x10 mil gold ribbon (7600D) ESD PROTECTION: Protection against Electrostatic Discharge DISPLAY: 4 line, 40

AIR-VAC DRS-24 Rework Station Control Foot Pedal Kissling D-72215 Wildberg 10A , 250V AC

CAB (Stegtrenner) HEKTOR 2 #8932145 PNEUMATIC PCB SINGULATION PUNCH

Component Lead Forming Machine / Electronic Component Lead Prep Equipment Up for Bid is Two Lead forming machines - both appear nearly identical but one says: Marshall Industries - Kinatechnics and the other one says ElectroPrep - Electrovert (USA Corp.) One machine is in working condition the other one has an air leak BUT they both need the tubing replaced on them.These work by connecting compressed air to them.

EFD 1000 XL Precision Electronic Fluid Dispenser 1000XL ITEM DESCRIPTION: Used, powers on - untested. Poor to fair physical condition with scratches on casing and crack in plastic casing. ACCESSORIES: Power cord & foot pedal switch included.

Cab Hektor 2 Pueumatic Depaneling Punch Foot Pedal Actuator & Lines #8932145 Pneumatic Sigulation Punch & Air Lines Max 6 Bar / 85 PSI Check Pictures For Details Serial Number 0002170S16

C7966 Semiconductor Equipment Corp Model 4450 Rework Station for Parts. Powers up as shown. Air pressure must be applied before the unit will power up.

ToolTek Engineering Corp D307A1 Brush Loader Penumatic Please refer closely to all photos before purchasing. Used, seems to be in good physical condition. ToolTek Engineering Corp D307A1 Brush Loader 110VAC 50/60Hz @ 5A Penumatic air intake Foot pedal interface Serial (?) DB-9 female connector This unit appears to be similar to the ToolTek Discovery 310 Automated PVA B

ToolTek Engineering Corp D307 Brush Loader Penumatic for Parts / Repair Please refer closely to all photos before purchasing. For Parts / Repair, not working. ToolTek Engineering Corp D307 Brush Loader 110VAC 50/60Hz @ 0.5A Pneumatic air intake Foot pedal interface This unit appears to be similar to the ToolTek Discovery 310 Automated PVA Brush Loader.

Air-VAC Model DRS21 Rework Station w/ Wild Microscope. This unit includes Dies for PLCC including: 68 PLCC, 28 PLCC and more Attached Airline Foot Pedal Wild-Heerburgg Binocular 10X Scope "We had an offer on this back in May of 2011 and attempted to fire up. We cannot get unit to heat up.

This Juki 1942GA was purchased for a particular project that was never implemented. This is a hard to find, heavy duty computer controlled shape tacking machine. Pristine condition.

var itemNumber = window.ebayItemID ? window.ebayItemID : -1; function passpara(){return '&id=1501261&itembgcolor=0xFFFFFF&bordercolor=0x000000&storewindowbgcolor=0xf1f1f1&toptextcolor=0xFFFFFF&bottomtextcolor=0xFFFFFF&stripcolor=0x006ab1&auctionclosemessagecolor=0xff0000&emptyboxmessagecolor=0xFFFFFF&buttovercolor=0x6

SINGER 269 Pencil Line Tacker This machine is set up to sew pencil line tacks o

var itemNumber = window.ebayItemID ? window.ebayItemID : -1; function passpara(){return '&id=1501261&itembgcolor=0xFFFFFF&bordercolor=0x000000&storewindowbgcolor=0xf1f1f1&toptextcolor=0xFFFFFF&bottomtextcolor=0xFFFFFF&stripcolor=0x006ab1&auctionclosemessagecolor=0xff0000&emptybo