id pulley for sale, brand-new and used.

34437 New-No Box, MFG- MDL-Unkn34437 LOT-5 Rubber roller pulley, 1/4" ID, 5/8" O, 9/32" Width, 1/16" width of center line. Item is New, unused, no factory packaging. Austin Surplus SKU: 34437 Location: GRG-R06-P13-S04-H-0000418

24532 Old-Stock, Digi PA1010041 Roller Drive, 31-3/4" Total L, 3-3/8" Shaft L, 1.43" Shaft OD, 5-1/2" OD of pulley 0.21" ID of pulley (cone). Item appears Unused and has been in storage for some time.. Austin Surplus SKU: 24532 Location: GRG-R02-P07-S05-0023534

146080 Old-Stock, HK Systems 155-0039 Shuttle Chain Sheave Pulley 1.93" ID 3" OD, 5/8" Track Width. Item appears Unused and has been in storage for some time.. Austin Surplus SKU: 146080 Location: GRG-R16-P13-S05-B-0015435

143217 New-No Box, Multivac 30134 Pulley 90T, 5mm Pitch, , 142mm OD, 24mm ID. Item is New, unused, no factory packaging. Austin Surplus SKU: 143217 Location: GRG-R9-P16-S3-0002625

36 30A Approx. OD: 4-15/16", bottom approx. ID(pictured on left): 3", top approx.

Abrasive Cut off Machine, Cutting Machine, Metallography Cutting Machine ACO

Thousands of Used Metalworking and Plastic Machines & New Machine Tools Photos, Full Descriptions and Prices - Fast & Easy

This is the same grinder I have been selling for about 6 years, but this is a plug and grind machine for 110/120 household current with a 3450rpm 1 HP marathon motor. Set up with 3 step pulley will give grinding speeds of approximately 1800,3600,7200 feet per minute. the stand and sanding belt not included.

Two Step Counter Shaft Pulley for Logan Lathes LA-141 As Pictured I have many parts for this lathe including the apron, carriage, lead screw, motor, reverse switch, various covers, cross-slide, compound and bed. Let me know what you're looking for. Browse other parts for sale at http://www.owwm.net/?page_id=417 Thanks for looking

24LB0502 PCS USED.500 ID2.820 OD.750 INCH THICH

vernier not included it is for size referance only check you measurements before purchasing ask to measure if you are not sure 2 5/8 od x 4 in long w/ 2 3/16 id 1# bare weight plus $1.00 handling p/m see my other items combine

v ernier not included it is for size referance see title it also has a hub 1.265 od x 1.570 id x 1/2 h no keyways or tapped holes looks new 9# bare weight plus $1.00 handling m/f/r/bx see my other items to combine

THIS IS VERY RARE HORIZONTAL MILLING MACHINE. MADE BY US MULTI MILLER COMPANY. MADE IN USA.

You will be getting ABEC-7 Bearings that are shrink fit to cu

You will be getting superior ABEC-7 Bearings that are shrink fit to custom ground interference fit and balanced spindles. If the spindle has a proper shrink fit to the bearings, they do not require a retention collar. Runout is .0005" or better.

-New steel shaft reducing bushing -Slips over 5/8 shaft and accepts 3/4 pulley or gear etc. -3/16" open slot for keyway or set screw -Zinc plated steel -I.D.: 5/8" -Length: 1-1/4" -O.D.: 3/4"