pulley bearing for sale, brand-new and used.

You will be getting superior ABEC-7 Bearings that are shrink fit to custom ground interference fit and balanced spindles. If the spindle has a proper shrink fit to the bearings, they do not require a retention collar. Runout is .0005" or better.

2 mandrels and a cylinder. Since I have not had them hooked to a motor, I am selling as-is. Craftsman mandrel with 3/8" V belt & pulley wheel.

Kearney Trecker Rotary Table 23" Model 23 - 4638 This unit has been completely gone through and rebuilt with NEW bearing, NEW seals and NEW wicking felts for lubrication. The internal gears all look very good, see pictures. I have a Boston Gear Reducer available with this rotary table.

Barudan X-Axis Assemblies - BESR, BEMR, BEX, + Others

 "Welding Secrets" No Other Book Will Prevent More Accidents

This is a completely refurbished delta light duty shaper assembly. It includes the spindle bearing cartridge, the housing, the height adjuster lever, the pulley, and the locking assembly. The bearings have been professionally replaced and it has been treated with penetrating oil to ensure that it will not rust in transit.

largest dia is 8 in made from aluminium not zinc balanced , with internal spline, .72 dia 10 tooth spline, with feed pulley attached , could also be used as a speed reducer pulley ball bearing od is 2..42 approx or 50 mm

This drill press is still made today. The drill press was completely rebuilt with all new bearing and belts. The lift assemble was taken apart and all parts were inspected and lubed.Make me a decent offer and it is yours.

JET 15" Floor Mount Electric Drill Press This JET Drill Press has never been used. I purchased it, assembled it and it was never used. It does NOT come with the original pack again because I bought this many years ago and did not keep the packaging.

Cutterhead with knives, gibs, and shims from 1975 machine. Surface rust removed, all parts cleaned and reinstalled. Original Powermatic knives have never been sharpened and have a couple of nicks.

This is a new permanent magnet motor. The motor is 120 Volts dc with a built-in bridge rectifier to operate on 120 Volts AC. This is a custom modified to fit UNIMAT- 3 / 4 lathes.

This is a new permanent magnet motor. The motor is 120 Volts dc with a built-in bridge rectifier to operate on 120 Volts AC. This is a custom modified to fit UNIMAT- SL-1000 / DB-200 lathes.

This is a new permanent magnet variable speed control motor. The motor is 120 Volts dc with a built-in bridge rectifier to operate on 120 Volts AC. This is a custom modified to fit UNIMAT- SL1000 / DB200 lathes.

This is a new permanent magnet motor. The motor is 120 Volts dc with a built-in bridge rectifier to operate on 120 Volts AC. This is a custom modified to fit UNIMAT- 3 / 4 lathes.