pulley for well for sale, brand-new and used.

This is a vintage Bendix Pacific Massey Harris combine hydraulic pump. This has been cleaned the hydraulic fluid drained. With some fluid in the tank, when the pulley is turned by hand, it spit out oil quite forcefully from the connectors on the side and made appropriate sounds.

2010UD6G.13.40 New Sanyo Denki, Ball Bearing, 2 Phase, 42MM Sq. (1.65 inch sq.), 5.3 OHM, 1.8 Degree Step (200 Steps per Revolution), Stepper / Stepping Motors, Part Number 103H5208-10U41. Each bid quantity is for a Factory Tray of (20) Motors.

Sottof Sales Brand new OEM part from long storage, DP-283 includes the bearing shown A couple of small nicks on pulley but nothing that effect use. Please research this item prior to purchase to be sure it will fit your machine, if you need measurements just ask, thanks. D4676.6 Important!

Sottof Sales Brand new OEM part from long storage, DP-283 includes bearings and spindle sleeve for 5/8" dia. spindle. A couple of small nicks on pulley but nothing that effect use.

Knife Making: Belt Sander/grinder high quality Drive Wheel Assembly for 3/4" drive shaft Heavy Duty and build to last. Many of my recent customers expressed their interest in certain parts that they would likely use in their home-build belt sanders. Here we offer the proven d

The WW-650 12 Volt Package Deal. by: Wolfgang Engineering.

The super quiet Enduro™ Pro SM600-1 Servo Motor pays for itself with a remarkable 60% to 80% energy savings compared to clutch motors. With the high and rising cost of electricity, you just can't afford to run a clutch motor any longer. The power and dependability of the brushless Enduro™ Pro SM600-1 is adequate for light duty sewing.

If you have Singer class 7,Consew 733 or comparable Seiko machine and you want servo motor,this will be your only choice.This is the 1400 Watts /1.87HP servo motor.All other brands comparable motors do not have a strange for this type machines. This motor pays for itself with the energy it saves! The super quiet Enduro™ Elite SM1050-2PF Servo Motor pays for itself with a remarkable 60% to 80% energy savings compared to clutch motors.

Enduro Pro SM645-2P Energy saving, dependable and efficient Servo Motor for commercial sewing machines. These high torque motors result in better handling and increased production! 220 Volts 800 WATTS with Positioner Description: The super quiet Enduro™ Pro SM645-2P Servo Motor pays for itself with a remarkable 60% to 80% energy savings compared to clutch motors.

This motor pays for itself with the energy it saves! The super quiet Enduro™ Elite SM1000-2 Servo Motor pays for itself with a remarkable 60% to 80% energy savings compared to clutch motors. With the high and rising cost of electricity, you just can't afford to run a clutch motor any longer.

This is a rather hard to find original cast iron pulley for a Fuller and Johnson hit and miss or throttle governed gas engine. It is in good used condition with no cracks, breaks, or repairs of any kind. It measures 8 inches in diameter with a 4 1/2 inch face.

This is a real nice original cast iron pulley for an International Harvester Famous or Titan hit and miss or throttle governed gas engine. It is in excellent condition with no cracks, breaks, or repairs of any kind. It is part number G1032 and measures 9 inches in diameter with a 6 inch face.

This is a real nice original cast iron pulley for an International Harvester Famous, Titan, or Mogul hit and miss or throttle governed gas engine. It is in excellent condition with no cracks, breaks, or repairs of any kind. It does have some mild pitting but nothing that will effect its performance as a belt pulley.

This is a real nice original cast iron pulley for a York hit and miss or throttle governed gas engine. It is in excellent condition with no cracks, breaks, or repairs of any kind. It measures 12 inches in diameter with a 5 inch face.

TS550 motor produces almost no noise, saves energy (60-80%) and is brushless, speed djustable and durable. It provides a high starting torque even at low speed or from a complete stop. By using a modern technologically advanced microprocessor,Hall sensor and Pulse-Width Modulation technology,the motor can be set to rotate at different maximum speeds, in either normal or reverse directions, and can start with different accelerating speeds.

Back by Popular Demand WW-650 Spindle. By: Wolfgang Engineering.

All around the world people want to know how a single unit, like PulleyMan, can have all the functions of a winch, lift, and a hoist? How PulleyMan can run along a fixed

Shipping will be within 2 weeks of sale....engine shipped will be very similar to one in picture, which is very close to the last 23 sold. Reason for delay in shipping, need to pick up, old timer has only a few remaining ready! UPDATE..engines are in and will ship ASAP!