0 gage for sale, brand-new and used.

Used SuperLogics strain gauge modules. Quantity of 3 , everything pictured is included, one terminal block is missing. From a working environment, but unable to test.

Used Set, Blocks and case are in very good condition. 81 Block set .050 - 4.0". The 4 Fractional Blocks and wear blocks were not included in this set originally.

var itemNumber = window.ebayItemID ?

GAGE HOLDER FOR DIAL TEST INDICATORSET - TECLOCK Features Reversible tungsten carbide contact point.

AMETEK USG 0-160 psi 2" 1/4" FIP CENTER BACK INPUT PRESSURE GAGE 1X762. Ametek US Gauge, 2" Diameter Dial, 1/4" NPT Fitting, 0-160psi Range, 5psi Graduations, Pressure Gage/Gauge. Part Number: 1X762.

mitutoyo_thickness_gage_kit Policies

Webber Gage Block Clamp 0 to 12 capacity When rectangular style gage blocks are used with accessories, it is necessary to secure them in an accessory clamp. Without the clamp, the forces encountered when using the combination of gage blocks and accessories may break the combination apart.

Bernell Carlton Wire Gage, Bin 01, New A combination gage calibrated for both Washburn and Moen (W&M), steel wires as well as (B&S), American Standard. The gage is used for non-ferrous metals and wires. The gage is slotted accurately for gaging 0-24 sizes and calibrating 0-30 sizes of wire.

A totally new and complete bore gage with a range of 0.700" to 1.4" Easy to setup and use: use a micrometer being held in a Micrometer-Vise in order to have your hands free to be able to adjust the dial indicator to the ZERO you choose, tight it, and you are ready to go.

Thank You For Looking At Our Products Product Information:Suburban Tool Permanent Magnetic Compound Sine PlateSeries S1 w/ Sine Plate Product Features & Specifications:Permanent Magnetic Sine Plate

Maury Microwave A034E "Metrology Grade" 3.5mm Connector Gage Kit "Thread On" ±0.000050 Gage Accuracy A034E1 F, A034E2 M, A034E3 F, A034E4 M The Maury model A034E is a "metrology grade" connector gage kit designed to measure 3.5mm and 2.92mm female and male connectors. These gage assemblies feature a "thread on" design that allows you to couple the gage directly to the connector being measured for hands free operation.

DATAQ DI-718B Data Acquisition and Data Logger - USB, SD card slot (DAQ/Logger w/ amp module only. No power supply inluded.) · Supports DI-8B Amplifiers/ signal-conditioned analog inputs. · Measures temperature, pressure, flow, current, voltage, and more using isolated 8B amplifiers.

Handy pocket gage is approximately the size of a thin pocket watch. Ideal for inspectors, purchasing agents and salespeople to check the size of materials up to 3/8 or 9mm thick. The gage fits naturally in the curve between the thumb and index finger.

PRISTINE CONDITION The item pictured in this listing is of the exact one the buyer will receive. If additional photos/info is desired, please send a message and I will respond appropriately before making a purchasing decision.

TRERICE Pressure Gauge #52-2873 0-100 PSI PLUS 316 SS Diaphragm Seal D610 303 Assembly This assembly is NEW OLD STOCK. The Pressure Gage OD is 5". The Diaphram Seal is filled with G (Glycol).

A used set of gage blocks 81 PC. Grade B no missing parts set contains the following sizes A .050, .1 to.1009 X .0001 increment's. .101 to.150 X .001 increment's .2 to1.0 X .050 increment's and a 2.0in 3.0in 4.0in all in good condition .

Made by Air Gage Co. This is a used Oil Seal Bore Gage in GREAT condition. Model #: 52069396-G8-1 / R-2 Specifications: Measuring Diameter: 2.518" Measuring Resolution: 0.00005" Overall Length: 7-1/2" Comes as shown in pictures.

SHOWS VERY LITTLE WEAR. CALIBRATED ANNUALLY. Includes 2109E dial gage.

Helios Bore gage set for range .157 to .374 (actually .155 to .376 is possible ) Has all the split ball probes in the set and 3 ring gages for setting. Old but Good condition. Set rings did not come with original set and box.