1 1/2 shaft for sale, brand-new and used.

2019UD6G.84 New Sanyo Denki, Ball Bearing, 1.1 Amp, 1.8 Degree Step (200 Steps per Revolution), Stepper / Stepping Motors, Part Number 103-775-7241. Each bid quantity is for One (1) Motor. You may bid / buy any number, up to the total quantity available above.

2005UD6G.68 New Sanyo Denki, Ball Bearing, 2 Phase 42MM Square (1.65 inch sq.), 5.3 OHM, 1.8 Degree Step (200 Steps per Revolution), Stepper / Stepping Motors, Part Number 103H5208-10U41. Each bid quantity is for One (1) Motor. You may bid / buy any number, up to the total quantity available above.

ServoBlocks increase a servo’s load-bearing capabilities by helping to isolate the lateral load from the servo spline and case. The extreme versatility of ServoBlocks allow users to create complex, extremely rigid, structures with ease using standard Hitec servos. The 1/2 ” aluminum hub shaft provides multiple mounting options using 6-32 screws.

ServoBlocks increase a servo’s load-bearing capabilities by helping to isolate the lateral load from the servo spline and case. The extreme versatility of ServoBlocks allow users to create complex, extremely rigid, structures with ease using standard Futaba servos. The 1/2 ” aluminum hub shaft provides multiple mounting options using 6-32 screws.

Clarostat/ Honeywell 600-128-c24 OPTICAL ENCODER ROTARY CONTROL PCB mount Obtained from govt surplus, looks unused, but I will call it used... 100% guaranteed. Here is some stuff I found on the interweb in blue...

.shippingcalculator a { display:block; width: 208px; padding:177px 0px 10px 0p

Omega Low Flow Liquid Meter (0.07 to 5.00 Gallons per minute) Model number FPR301 new in boxMy company bought some meters and valves from Omega for a production project about 2 years ago and we had a few items left over. Below are the specs from the Omega website:

NEW IN BOX. DAYTON 5UKE7 GP MOTOR. TEFC, (TOTALLY ENCLOSED,FAN COOLED).

Selling a new-in-box GE 1/15 hp 1550 rpm 115v motor.sleeve bearings open. Shaft 3/8" x 1 1/2" shaft CW rotation when looking at shaft.

Selling a new-in-box GE 1/15 hp 1550 rpm 115/230v motor.sleeve bearings open. Shaft 3/8" x 1 1/2" shaft

Selling a new-in-box GE 1/15 hp 1550 rpm 208/230v motor.sleeve bearings open. Shaft 3/8" x 1 1/2" shaft

This item is: A.O. Smith Motor: Mod JA2C606N, 115V, 60 Hz, .60A, 1550 RPM, 1/70 HP 1 Phase, Shaft measures 1/4" diameter, x 2 1/4" in length.Unused, shaft has a very light dusting of rust. Sales tax of 7.4% will be added to items shipping to locations in Kansas.

Brand new motor manufactured by Buehler Nominal voltage: 12 V DC No-load speed at 12 V DC: 2,000 RPM No-load current: 250 mA Stall current: 600 mA Runs in either direction - simply reverse polarity of power supply Shaft No. 1 dimensions: 6.3 mm long x 2.5 mm diameter Shaft No. 2 dimensions: 13.5 mm long x 2.5 mm diameter Motor dimensions (not including shaft): 56 mm L x 31 mm Dia.

YOU ARE BIDDING ON Direct Drive Blower, Split Phase Totally Enclosed Air Over Motor, HP 1/3, RPM 1725, Number of Speeds 1, Voltage 115 V, NEMA Frame 56Z, Body Diameter 6 1/8 Inch, Service Factor 1.00, Frequency 60 Hz, Mounting Cradle/Stud, Bearings Double Shielded Ball, Thermal Protection Manual, Shaft Dimensions 1/2 x 1 1/2 Inch, Full Load Amps 5.5, Rotation CW/CCW NEW , PACKAGE IS NOT IN GOOD CONDITION MODEL # 5M298 MFR : DAYTON

Canadian Ground Shipments by Purolator Click Here for Details

?????

?????

?????

175 RPM Large Gearhead Motor - 12V DC - High Torque - 6mm D Shaft New gearhead motor Operates on 4 – 12 VDC 175 RPM at 12V No load current at 12V: 80mA Stall current: 1,100 mA Speed is proportional with voltage (Speed range is 55 RPM @ 4V to 175 RPM @ 12V) Very high torque output, shaft is very difficult to stop by fingers even at just 6V D-Type Shaft dimensions: 27 mm Long x 6 mm Diameter Motor dimensions (not including shaft): 84 mm Long x 4

10 X Mabuchi RS-555 PH Motors - 12V - 4500 RPM - High Torque Motors Brand new motors Manufacturer: Mabuchi Model: RS555 PH - 3255 You will receive 10 motors Operates on 12 VDC nominal No load speed: 5500 RPM No load current: .18 A Full load torque: 380 g-cm (5.3 oz-in) Rated speed: 4500 RPM Full load current: 2.4 A Stall torque: 1360 g-cm (18.9 oz-in) Stall current: 11.8 A 5 pole armature