1 1/2 shaft for sale, brand-new and used.

5 X Mabuchi RS-555 PH Motors - 12V - 4500 RPM - High Torque Motors Brand new motors Manufacturer: Mabuchi Model: RS555 PH - 3255 You will receive 5 motors Operates on 12 VDC nominal No load speed: 5500 RPM No load current: .18 A Full load torque: 380 g-cm (5.3 oz-in) Rated speed: 4500 RPM Full load current: 2.4 A Stall torque: 1360 g-cm (18.9 oz-in) Stall current: 11.8 A 5 pole armature

?????

Geared Dc motor

Powerful little 12v motor for many hobby applications. Motor comes with a V-Groove pulley for use with O-Ring belt or can be removed for straight shaft connection. Rubber grommet on output end was apparently a motor mount and can also be removed.

Motor: Rated Voltage: 13.5 VDC Rated Speed: 50 RPM Rated Load: 60 Watts Rated Torque: 11.5 N-m (8.5 ft-lb) Mounting: M6 screw holes Shaft: 10mm shaft with 2 flats where flat to flat is 6.6mm and threaded end to fit a M6 tightening nut This motor is ideal for machinery, automotive, or home/garage projects. The gear motor is measured to be 7" long and motor itself has a diameter of 2.5 inches. Coupling: Secure Type: Set scr

1/2 HP, TEFC 316 Stainless, double shaft, RPM 1625, 208-240,60 hz 38 available; ask for quantity pricing. All new.

Baldor Industrial Grade Variable Speed Drive Electric Motor 1/8 HP 90 DC 1.37 AMP 1725 RPM FRAME: 125 TYPE: 125DCPA Spec. 32154A Shaft size 1/2" x 1 7/8" Tested Good ! Like New condition Satisfaction Guarantee !!

AO Smith 1/3HP Electric Motor S48H2EC-11 115V 3450RPM Pool Spa Hot tub oil pump Hertz: 60 Shaft: 6/8?x2? (Close up in pics) Bearings: Sleave Model: S48H2EC-11 Max Amps: 9.4 Service level: 1.

1/2 HP 14MM SHOP FOX 14MM SHAFT DRILL PRESS MOTOR This is a 1/2HP 14mm SHOP FOX 14mm shaft Drill Press Motor. Single Phase 1750 RPM 110 Volt Clockwise Rotation Comes as shown.

[ Dayton 3/4 HP 208-230/460 V 1725 RPM General Use Motor

Dayton Fan Motor, 1/3 HP, 1100, 115 V, 48YZ, TEAO - 4ETE5 Air Circulator Motor Air Circulator Motor, Permanent Split Capacitor, Totally Enclosed Air-Over, 1/3 HP, Nameplate RPM 1100, Voltage 115, Full Load Amps 4.2, 60 Hz, 1 Phase, NEMA/IEC Frame 48YZ, Service Factor 1.0, Ambient 40 C, Insulation Class B, Number of Speeds 2, Yoke/Stud Mounting, Sleeve Bearings, Auto Thermal Protection, Rotation CCWLE, Body Dia 5 5/8 In, Length Less Shaft 6 5/8 In, Shaft Dia 5/8