2020UD6G.84 New Sanyo Denki, Ball Bearing, 1.1 Amp, 1.8 Degree Step (200 Steps per Revolution), Stepper / Stepping Motors, Part Number 103-775-7241. Each bid quantity is for One (1) Motor. You may bid / buy any number, up to the total quantity available above.
These motors have the round shafts extending out 7/8" (22.2 mm) and are .23" ( 6 mm) in diameter.The 4 mounting holes are 2 inches (50.8 mm) apart. I believe these are the high quality motors used on aircraft.Made in Japan. The 2TK3CA-A is an AC Torque Motor from Oriental Motor.
This auction is for a large Electro-Craft permanent magnet servo motor in excellent used condition that runs very smooth and quiet. The place on the tag for the model number is blank see picture #4. It also has a 5/8" X 1-1/2" shaft.
i used them for project in electronic and robotic very strong and very accurate motor perfect for hobbyist and devellopper. dc motor escap k24 with 6 inches cable swiss made Motor type: 22n 28 205e 32 Recommended operating voltage range: 12-24 V DC Speed: 295 RPMNo load current: 10 mA Gearhead ratio: 8:1Torque force: 1-1.5kg.CMGear: K24Power: 3.8WShaft dimensions: 6.2 mm Long x 2.5 mm Diameter 14 teethWeight: 2.7 oz. (77 g)Made in Switzerlanddimension are 57.50 mm long including shaft &nb
Veeder-ROOT Mechanical Counter In excellent condition, this 5-digit Veeder-Root mechanical counter was pulled inside a Jobin Yvon/ISA monochromator. The last two digits are combined on a single wheel with tick marks for the last 0-10 number sequence. Length: 2.45" (not including shaft); 3.20" (including shaft and gear head) Height: 1.55" Width: 1.0" Shaft: 0.19" diameter (gear head not included in measurement) Turns smoothly.
Veeder-ROOT Mechanical Counter In excellent condition, this 3-digit Veeder-Root mechanical counter was pulled inside a Jobin Yvon/ISA monochromator. Length: 1.69" (not including shaft); 2.42" (including shaft and gear head) Height: 1.55" Width: 1.0" Shaft: 0.19" diameter (gear head not included in measurement) Turns smoothly. Four mounting bolts.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.