1.25 ratio for sale, brand-new and used.

12V Heavy Duty Linear Actuator - (180lbs Thrust) 2" Stroke Move up to 180 lbs for under $130! Our heavy duty linear actuators can be used in place of pneumatics and hydraulics. The heavy duty linear actuators are driven by high torque brushed DC gearmotors coupled to an ACME screw to create a linear drive.

Product Title Easy Add-on Products

Product Title Easy Add-on Products

Schneider Electric Variable Frequency Drive - Altivar 212 ATV212HU30M3X 3kW/3HP This product is new without packaging or documentation, the documentation is available from the manufacturers web site. This unit was purchased for a for a project that was never started, it has been powered on, tested and reset to factory defaults. Specs are from manufacturers web site: Main

This is a Brother Gear motor BH2LM22R-025TK4A 1/4 HP 4P Ratio 25:1. Included is a KBVF-23 Variable Frequency Drive with 230v Single Phase input and 3 phase variable output controlled with potentiometer or 0-5 volts. Controls on unit to limit current, ramp up or down forward or reverse very versatile comes with installation and operation manual and the 4 mounting bolts.

New item, no box. Grant Gear, STF-175-25-A-A, 56C, 25:1 Ratio, .55 Max HP, 460 Max Torque, 1750 RPM = 70 rotations, Worm Gear Speed Reducer See link for similar new model: http://www.electricmotorwholesale.com/BALDOR-GSF2518AA/

DC motor speed controller input is DC Not directly connected to an alternating current (example: 220V AC household), otherwise it will burn! ! !

KBIC-240DS Variable Speed DC Motor Controls for Shunt Wound, PM and AC/DC Motors - used, but tested. Clean With SI-5 barrier terminal board signal isolator and .05 ohm horsepower resistor 0-90 VDC output 1/100 – 11?2 Hp @ 115 VAC – 50/60 Hzs 1/50 – 3 Hp @ 230 VAC – 50/60 Hz

MFG: GROVE GEAR Category: Gearboxes Part/Model # FHM220 Description: 1-GROVE GEAR, ----FHM220,---- WORM SPEED REDUCER,---- RATIO 25,---- 56C, ----1.438 BORE ---- INPUT HP 2--- NEW SURPLUS---LIGHT RUST FROM SHELF WEAR--- SS95---12465---BLDG G---33#---JC Payment Policy Payment through PayPal or Call 877-859-3015 for Credit Card approval.

High Current DC Motor Speed Controller Max 1250W / Input Voltage DC12~60V Rated current: 22Amp PWM Speed Control (Duty Ratio

DODGE TD115 TORQUE ARM SPEED REDUCER 15.35:1 RATIO 2149RPM NEW IN BOX PHOTO IS ACTUAL ITEM WEIGHT OF ITEM: 44LBS DIMENSIONS OF BOX: 13-1/2" X 7-1/2" X 9-1/4" BWR3B2 MLW/LMS WARRANTY All equipment comes with a 6 month warranty. Equipment is guaranteed to be received as described in the listing or a full refund will be given upon return. SHIPPING Most items will be shipped the next business day after payment has cleared.

Up for auction is a used gear reduction box. The shaft spins free and no apparent grinding noises. It hasn't been run in a few years but worked when disconnected.

The items are USED and sold AS-IS, but were removed from service in a working condition. Below are the detail from the manufacturers page and I believe all products are current. Stepper Motor The HT34-490 two-phase stepper motor is designed for use with the STAC6 series of stepper drives (120 VAC input versions only) and is suitable for a wide range of motion control applications.