1.9 diameter conveyor rollers for sale, brand-new and used.

 Nestaflex Portable 226 Flexible 24"W Roller Conveyor 200 Lbs Per Foot!!

These conveyor sections have not been used and are inside building minimal light surface rust will clean up with little effort no damage good condition. They are 44" long x 12" wide with rollers that measure 9 3/4" wide x 1 1/2" diameter rollers. The thickness of frame is 2 1/2", rollers turn with smooth action and are bearing engineered.

These Ralph-Pugh rollers measure 16” inches long and 1.9” inches in diameter. They have a Spring loaded 5/16” hex shaft. Rollers have been packed into boxes without covering, They have collected dust and some surface rust on shaft but only cosmetic.

NEW standard duty 1.9" diameter conveyor rollers. Mathews 29000 brand. 30" long ( 29-7/8" bearing to bearing, 31-1/4" shaft length).

Price lowered again to under $10,000! We just posted a short Video on YouTube to see the machine in a dry run operation. Please note right now the machine is shrink wrapped and ready for shipping.

Homag KF 20/20/QA/30 Production line consists of the following: (1) Homag Powered Infeed Loading Conveyor Table

The specifications of these gravity conveyors are: 24-1/4" overall width 120" long 21-1/2" between frame 1.9" diameter rollers set above frame on 4" centers 3-1/2" galvanized frame height Supports are available for this conveyor, but not included in the price. Each section of conveyor weighs 210# and must ship via common carrier to a commercial address with the ability to unload a dock high truck. Shipping is not included in

This auction is for one (1) heavy duty plastic roller. I have 24 available. The rollers are 5" long x 1.9" diameter with a 1/2" bore.

Hytrol 16" x 90 Degree Powered Roller Case Conveyor (3) units available, Priced individually 1.9" diameter rollers 3" centers 18" Between frames Tapered rollers Painted frame construction Legs 1/2 Hp / 1725 rpm drive Electrical 230/460 Volt / 60 HZ / 3 phase

Hytrol 16" x 90 Degree Powered Roller Case Conveyor (3) units available, Priced individually 1.9" diameter rollers 3" centers 18" Between frames Tapered rollers Painted frame construction Legs 1/2 Hp / 1725 rpm drive Electrical 230/460 Volt / 60 HZ / 3 phase

New DoAll Miter Cutting Band Saw - Model 400S Youtube Video: https://www.youtube.com/watch?v=coIKXIeZeHg&list=UUepCl802ju9CvVqwe7CPaiA&index=10 400S The 400s general purpose band saw is DoALL's introductory machine in the NEW StructurALL family of saws. Swiveling 45 degrees, it's the ideal machine for the small to medium fabricator or machine shop, looking to make extremely accurate (straight or miter) cuts in smaller quantities. The 400S feature

ROLLERS, Conveyor type , metal , 4" diameter roller, 9" long, 1" dual bearing shaft, 1" x 3 bolt flange bearings with grease fittings..brackets [ end peices ] are 7" High x 5" wide x a 2" wide foot. smooth rolling, good condition, these cost around $90.00 each w/o brackets.... shipping cost is $15.00 for one flat rate, 2 or more will go Fedex at cost only..

For SALE 2 Label Commercial Digital Printing Presses WORKING PRESS AND FRONT END XEIKON Model: DL3300-60 (re-branded and sold by Nilpeter) but the Xeikon engine is a DCP/32S Serial: 01-01182 5 Colors - Single Pass Press WORKS but will need a Maintenance and Recalibration ALL PARTS WORK PROPERLY and press is very clean and complete PRESS and FRONT END WORKS Second Press: AGFA CHROMAPRESS PRESS AND FRONT END

Origen Bakery Equipment LLC 

Italpresse Lamination Line Includes: Italpresse R3/160 63" Two Roller Glue Spreader (E-1-028)