1/8 in screw for sale, brand-new and used.

20 pcs Angle 90° 8 pin/way Pitch 3.5mm Screw Terminal Block Connector Green Color Pluggable Type with angle pin Quantity: 20 pcs screw part and 20 pcs PCB part Condition: Brand New Spec: Material - Housing: PA66 UL94V-0 - Contact: Phosphor bronze,Ni plated - Solder pin: Brass,Tin plated - Screw: M2 ,Steel,Zinc plated Electrical - Rated voltage:

20 pcs straight-pin 8 pin/way Pitch 3.81mm Screw Terminal Block Connector Green Color Pluggable Type Quantity: 20 pcs screw part and 20 pcs PCB part Condition: Brand New Spec: Material - Housing: PA66 UL94V-0 - Contact: Phosphor bronze,Ni plated - Solder pin: Bra

var itemNumber = window.ebayItemID ?

2574XE1G.22 New Weidmuller (Made in Germany) EK 35 or EK35 Terminal Blocks, 6AWG to 2AWG, Part Number 035476, EAN Number 4008190187972. Each bid quantity is for One (1) Terminal Block. You may bid / buy any number, up to the total quantity available above.

WE BUY OBSOLETE AND EXCESS INVENTORY! This is a lot of 29 Beau 9 position screw barrier strip terminal blocks. These are unused with dimensions of 6" X 1 3/8" X 5/8" made in the U.S.A.

2920XG2H.09 New Cabcon A/S, 20 Amp 300 Volt, 3 Position, 8.25 mm Pitch, Closed Barrier Blocks for PCB or Printed Circuit Boards, Part Number YK 331 3PBK, or YK3313PBK, or DBA32-086LF, or YK3310303000G. Each bid quantity is for a Lot of Ten (10) Terminal Blocks. You may bid / buy any number of lots, up to the total quantity available above.

One small single lug. One small 6 lug. (Measuring from exact center of one mounting hole to the exact center of the other mounting hole it's approximately 1 and 3/4 inches.) One large[r*] 7 lug.

var flashVersion = window.flashVersion ? window.flashVersion : 0;if (flashVersion

var flashVersion = window.flashVersion ? window.flashVersion : 0;if (flashVersion

RENEW RZ-15GW2S-B 3-screw Terminal Long Hinge Roller Lever Limit Micro Switch Product Name : Micro Switch; Model No. : RZ-15GW2S-B3; Contact Type : 1NO, 1NC, 1 Com; Mounting Type : Panel Mount Termination Style : Screw Terminal; Actuator Type : Long Hinge Roller Lever; Rating : 15A 125V/250V/480V AC,1/4 HP 250V AC,1/4A 250V DC AC-15 : 2A/250V, Ith 15A 250V; DC-13 : 0.25A/250V; Switch Body Size : 4.9 x 1.7 x 3.3cm / 1.9" x 0.7" x 1.3" (L*W*H) Fixing Holes Dia.

Series 1640 Floating Contact Null Switch for High and Low Actuation Visual Set Point Adjustment...Adjustable Null Zone The unique electric switch design in the 1640 is another Dwyer Instruments, Inc. innovation. The Dwyer Model 1640 Differential Pressure Switch resembles the Series 1630 switches described on the previous page.

Search Shop:

1-0 2 positions control and 8 screw terminals design. Suitable for a wide range of applications, it can be applied as a circuit control switch, master control switch, testing equipment control switch, or change-over switch for electric welding machinery and other equipment.

3PDT ON/ON 2 Position 9 Screw Terminals Toggle Switch 15A/250VAC 10A/380VAC

DPST 4 screw terminals ON/OFF 2 Position Toggle Switch. Can be used on low voltage or high voltage circuits ideal for switching lights or motors. Each switch is designed with 2 hex nuts, a flat washer, with waterproof rubber boot design.

CONDUIT FITTINGS This auction is for a lot of 89 unused electrical conduit fitting. These are new but have been inn storage for a long time and some have minor corrosion. See the table below for the exact contents of the lot.

PRICED TO SELL These are NOT the cheap twist-on wire connectors that you get at the hardware store. They are precision MIL-SPEC screw-terminal splice conductors, as found within fighter jets. They were not manufactured during the Cold War; they are new parts—made in 2005.