2 muffler for sale, brand-new and used.

SPECS Engine Type: Vertical Engine Power: 23 HP Displacement: 603 cm Charging System: 15 amp Cooling: Air Cylinders: 2 Dry Weight (w/o muffler): 91.5 lbs. Shaft Size: 1 " X 80MM Muffler: Not included Oil Capacity: 2.2 qt. Starter: Electric Warranty: See authorized Kawasaki servicing dealer

SPECS Engine Type: Vertical Engine Power: 23.5 HP Displacement: 726 cm Charging System: 15 amp Cooling: Air Cylinders: 2 Dry Weight (w/o muffler): 102.7 lbs. Shaft Size: 1 1/8 " X 100MM Muffler: Not included Oil Capacity: 2.2 qt. Starter: Electric Warranty: See authorized Kawasaki servicing dealer

Wacker OEM Muffler Part # 114770 Wacker WM80 engines BS50-2, BS50-2i, BS60-2, BS-60-2i, BS70-2i, BS500, BS500S, BS500-oi, BS600 Gasket not included

This is a New REPRODUCTION Muffler for a Briggs & Stratton Gas Engine. 1 inch pipe thread fits Models 19 & 23 and possibly others. Replaces Briggs # 290933.

This is a New Replacement Ball Muffler For Any Engine That Uses A 2" Pipe thread For the exhaust, It is Like Many Of The Mufflers That were used On Many Brands & Models Of Hit & Miss Gas Engines. This Is Bolted Together Like the Originals With 3/8" Square Nuts & Bolts, They were used On The Galloway, Associated, United, Witte, Amanco, Waterloo & Many Others, Basically Anything with 2" Pipe thread ...................... Fits: 5 Hp & Up Sizes......

Brand new without box! The muffler is 3" in diameter has a 3/4" nipple that is 1/2" long.It will fit many small engine applications, not for sure of the applications!!! Look at the pictures good and email with any questions before bidding, sold as is, will combine on shipping.

Brand new without box! You will receive two mufflers. The muffler is 3" in diameter has a 3/4" nipple that is 1/2" long.It will fit many small engine applications, not for sure of the applications!!!

Brass Clam Shell type muffler, 1/8" npt mounting thread, the two halves are held together by three 2-56 brass screws. With 1/16" spacer in between. Total thickness assembled 13/16", outside diameter 1-5/8".

PLEASE NOTE: THIS IS ONLY THE GENERATOR AND ENGINE SIDE WITH ITS HARNESS TO PLUG INTO A CONTROL PANEL, NO CONTROL PANEL INCLUDED. LOCAL PICKUP ONLY....NO CRATING Please don't message me with inconsiderate comments about the description...I can tell by some questions asked that a persons knowledge of the equipment is limited and they need to do their research.

UP FOR SELL ARE THE MUFFLER WT GASKET COOLING PLATE FOR STIHL TS410 TS420.SAME AS SHOWN IN THE PICTURE All of our products come with

IBC TOTE BULK CONTAINER AIR MIXER Industrial top entry air agitator with TOTE CAP connection QT

Brand: North Description: muffler assembly for use with 85300 hood respirator Part Number: 85307 Condition: NEW, opened for pictures. Shipping will be calculated based zip code. Please ask any questions before bidding, and thanks for looking.

This is a used 7.5KW mobile ONAN Generator. It is run off of a 719cc Kubota diesel motor. It is in great shape and ran flawlessly when removed from the vehicle it was in.

High Quality aftermarket muffler fits Stihl TS410 and TS420 . This aftermarket muffler has the following specification(s): Replaces Stihl 4238-140-0611 Includes, Gasket, Cooling plate & 2 Screws Does not include spark arrestor High quality aftermarket replacement part