20mm t slot for sale, brand-new and used.

Untitled Document Pack of 5 Pcs-T-Slot Nut 1/2" M12 Slot Nuts Clampi

Untitled Document (10 Pcs) Black Oxide Plated Tee Nuts Size - M-16 T

Untitled Document Black Oxide Plated Tee Nuts Size - M-16 To Suitabl

ebay

Untitled Document

Description: The TS uses T-slot extrusions for the Y axis (as well as the frame, like the RS). Advantages of the TS: A single type of framing element is used (2020 extrusion), which simplifies the BOM. Better suited to longer Y-axis versions, because the extrusions have better rigidity over length than the M10 threaded rods.

Description: Lot 1pcs HSS T Slot Mills Dia 20mm Endmills and Slot 8mm End mill Shank Dia 12mm Specification: Cutting dia(d): 20 mm Shank dia(d1):12 mm

Reprap Wilson TS 3D Printer frame 2020 T-slot Aluminum Extrusion 4*400mm+2*330mm Description: The TS uses T-slot extrusions for the Y axis (as well as the frame, like the RS). Advantages of the TS: A single type of framing element is used (2020 extrusion), which simplifies the BOM. Better suited to longer Y-axis versions, because the extrusions have better rigidity over length than the M10 threaded rods.

Used these in the beginning of a project that got scrapped due to a design change. Some minor cosmetic damage, but structurally unstressed, just little scratches here or there or marks from screws and the t-slot nuts. 884mm with holes: 7.3mm diameter at 247.5mm, 447.5mm, 647.5mm from left side.

Used these in the beginning of a project that got scrapped due to a design change. Some minor cosmetic damage, but structurally unstressed, just little scratches here or there or marks from screws and the t-slot nuts. 1285mm length, with tapped ends at one end M5x0.8

Used these in the beginning of a project that got scrapped due to a design change. Some minor cosmetic damage, but structurally unstressed, just little scratches here or there or marks from screws and the t-slot nuts. Unlike my other listing for extrusion of the same length, this does not have holes drilled through it.

GRIPPER BAR HOLDER FOR KOMORI PRINTING PRESS PART: 444-3239-034 MORE USED KOMORI LITHRONE SPRINT SPICA PARTS IN STORE; PLEASE CALL 1-800-991-0400 EXT O FOR MORE DETAILS WE ALSO SELL AND BUY USED KOMORI LITHRONE SPRINT SPICA PRINTING PRESSES

KOMORI WASHUP BLADE DESCRIPTION: LITHRONE 28 METAL AND RUBBER ORIGINAL PART PART NUMBER: 281-4601-401 CONDITION: NEW PLEASE CALL 1-800-991-0400 EXT O FOR MORE DETAILS

KOMORI ORIGINAL GRIPPER HOLDER DESCRIPTION: COMPLETE ASSEMBLY PART NUMBER: SGA-3512-400 CONDITION: NEW PLEASE CALL 1-800-991-0400 EXT O FOR MORE DETAILS

(On Products over $75) Hakko 920-T-RT 920 Series Slotted Soldering Tip 4.20mm for Mach-1 920M, 921M, and 922M Irons New - Registered Distributor - Factory Warranty The Hakko 920-T-RT is a 4.2mm slot tip for use with Hakko's Mach-I iro

8020 Bosch 28mm x 28mm x 20mm T-Slot 2 Hole Inside Corner Bracket - Lot of 40 Sale includes 40 units. Lightly used units in excellent condition. Hex-bolts/fasteners not included.

Description: Lot 1pcs HSS T Slot Mills Dia 40mm Endmills and Slot 10mm End mill Shank Dia 20mm Specification: Cutting dia(d): 40 mm Shank dia(d1):20 mm