3 8 aluminum bolts for sale, brand-new and used.

6 bolts and nuts all. Aluminum payment due within 3 days added six aluminum lock washers for aluminum flat washers.

Description: 3D Printer Mini Kossel Delta Robot Fasteners Set Nuts & Bolts Screw Full Kit for 2020 Aluminum Extrusion Frame Note: If you need the fasteners set suitable for 15*15mm aluminum extrusion frame, please check our store. The package list: Cap Screws - (9) m2.5x12 Cap Screws - (78) m3 x 8 Cap Screws - (2) m3 x 10 Cap Screws - (4) m3 x 14 Cap Screws - (6) m3 x 16 Cap Screws - (5) m3 x 18 Cap Screws - (7) m3 x 20 Cap Screws -

Description: 3D Printer Mini Kossel Delta Robot Fasteners Set Nuts & Bolts Screw Full Kit for 1515 Aluminum Extrusion Frame Note: If you need the fasteners set suitable for 20*20mm aluminum extrusion frame, please check our store. The package list: Nuts - (1) m5 * Nuts - (100) m3 Nyloc Nuts - (100) m3 Washers - (1) m5 * Washers - (30) m3 Cap Screws - (1) m5x20 * Cap Screws - (3) m2.5 x 16 Cap Screws - (6) m2.5 x 12 Cap Scr

Genuine U.S. Military Issue Surplus   Aluminum Hub with Shoulder Bolts   P/N: 11659919 P/N: 11659909 On the hub it has the following casting number.... K A E 11659909   The overall size is 4" x 16 1/2" Outer Diameter (approximately) There are two different sizes of shoulder bolts.

Great kit for a DIY poultry plucker like the whizbang! For sale is an aluminum plate for a DIY poultry plucker, Steel flanged shaft, Barrel, 2 Bearings (pillow blocks), drive and driven pulleys, and 125 plucking fingers. I've attached a picture of a blank plate and also one with the fingers installed.

Great kit for a DIY poultry plucker like the whizbang! For sale is an aluminum plate for a DIY poultry plucker, Steel flanged shaft, 2 Bearings (pillow blocks), drive and driven pulleys, and 168 plucking fingers. The fingers do not come installed, you will have to do that yourself.

· Payment within 5 days of auctions end

Up for auction is a vintage aluminum cylinder head from a Briggs & Stratton engine. Head measures 5" x 4-1/8". Not sure of the size this head fits but it is probably in the 2-1/2hp to 3-1/2" hp range.

Guide rail mounting bolts for the Delta Unisaw. This sale is for a set of four (4) BRAND NEW mounting bolts for securing the 1 3/8" fence guide rails to the edge of a vintage Delta Unisaw table. This socket head style bolt is a much improved design as compared to the OEM screwdriver slotted rail mounting bolts provided by Delta.

Beeswax foundation rollers Maintenance instruction.Technical characteristicsThe size of a cell is 5,4±0,05 mm.Width of an engraving is 300 mm.Material of an engraving of plasticityDimensions:Length is 420 mm.Width is 150 mm.

Auction is for a quantity of 75 (SEVENTY-FIVE) "Lock-Bolts":They are part #H2LP-E12-10 or NAS1532H10They are New -but package has been opened. *These are not your every-day household fix-um-up rivets.**I see they are sometimes called a "Huck-Bolt" and you need a "Huck" tool AND 3/8" collars this auction is just for the bolts

******ABSOLUTELY NEW, NEVER USED, WITH ORIGINAL PACKAGING & COVERS, NOT IN BOX****** PLEASE SEE BELOW TO IDENTIFY CONFIGURATION OF PART#'S AFTER 3051C 3051C Coplanar Pressure Transmitters Ordering Information H The Standard offering represents the most common options. The starred options (

3/8"-16 X 1 1/2" Long Hex Head Titanium Bolts - 8 pcs 9/16" Wrench Size .240" Head Thickness, Bolt weight is 1/2 ounce. Grade - Unknown These titanium bolts are a commercially made. Some of the benefits from using titanium include that it is ultra corrosion resistant, and has a high strength to weight ratio.

CLOSER THRU-BOLTS 1/4 - 20 * New still in original package (old stock)* 1/4 -20 thread * Package of 4 (29 package available)* 3/8" x 1 5/8"* Thru-bolts are not aluminum in color only (finish)* Thru- bolts only no screws or bolts * SHIPPING THE LOWER 48 STATES ONLY

Get Expert Advice -> Save Time and Money On Average we deliver 30% Savings to Our Customers

Manual Flush Bolt for Metal Fire Door 12" Rod and 3/4" Throw This manual flush bolt for metal fire door 12" rod and 3/4" throw is designed specifically for metal doors. The bolt is made from aluminum zinc alloy. This is designed to give security to any door it is added to.