Description: The TS uses T-slot extrusions for the Y axis (as well as the frame, like the RS). Advantages of the TS: A single type of framing element is used (2020 extrusion), which simplifies the BOM. Better suited to longer Y-axis versions, because the extrusions have better rigidity over length than the M10 threaded rods.
Condition: NEW Specifications: Plate Diameter: 10" T-Slot Dimensions: 12mm x 20mm Through Hole: 60mm Comes as shown in pictures. Returns are on unused items and all items are inspected thoroughly. If Item NOT PAID Within 72 Hours of Invoice The Item Will Be Relisted.
Reprap Wilson TS 3D Printer frame 2020 T-slot Aluminum Extrusion 4*400mm+2*330mm Description: The TS uses T-slot extrusions for the Y axis (as well as the frame, like the RS). Advantages of the TS: A single type of framing element is used (2020 extrusion), which simplifies the BOM. Better suited to longer Y-axis versions, because the extrusions have better rigidity over length than the M10 threaded rods.
Used these in the beginning of a project that got scrapped due to a design change. Some minor cosmetic damage, but structurally unstressed, just little scratches here or there or marks from screws and the t-slot nuts.
Used these in the beginning of a project that got scrapped due to a design change. Some minor cosmetic damage, but structurally unstressed, just little scratches here or there or marks from screws and the t-slot nuts. 884mm with holes: 7.3mm diameter at 247.5mm, 447.5mm, 647.5mm from left side.
Used these in the beginning of a project that got scrapped due to a design change. Some minor cosmetic damage, but structurally unstressed, just little scratches here or there or marks from screws and the t-slot nuts. 1285mm length, with tapped ends at one end M5x0.8
Used these in the beginning of a project that got scrapped due to a design change. Some minor cosmetic damage, but structurally unstressed, just little scratches here or there or marks from screws and the t-slot nuts. Unlike my other listing for extrusion of the same length, this does not have holes drilled through it.
Industrial model, Ball Screws on all axis and over 100 inches per min travel. This is a 24"x 24" x 4.5" CNC. It's milled from 6061 aluminum, 20 mm rods, two precision forged double bearing blocks, and an oil flush connector on each axis.
Commercial model, Ball Screws and 25mm Rail & Carriages on all axis. Special Pricing reg $4995.00 This is a 24"x 49" x 4" CNC. It's milled from single sheet of 6061 aluminum, not forged pot metal and ground to fit then covered with tin.
KOMORI AMPLIFIER DESCRIPTION: DAMP AMP FRK200C DES200C-Z1 PART NUMBER: 5GH-6100-170 CONDITION: FOR PARTS NOT WORKING IN BOX PLEASE CALL 1-800-991-0400 EXT O FOR MORE DETAILS
KOMORI AMPLIFIER DESCRIPTION: DAMP AMP FRK200C DES200C-Z1 PART NUMBER: 5GH-6100-170 CONDITION: FOR PARTS NOT WORKING IN BOX PLEASE CALL 1-800-991-0400 EXT O FOR MORE DETAILS
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
