3 4 inch bushing for sale, brand-new and used.

This sale is for a quantity of 1 of the item pictured. 302032 Kit, #2 V-wheel bearing with eccentric bushing and mounting hardware. 3/8 id Kit includes one #2, V-wheel bearing with dual rubber seals, one eccentric bushing (stainless steel), one .032 flat washer, one hardened SAE washer, and one, 1/4-20 x 1 1/4, Steel alloy, Socket Head Cap Screw.

New Thomson MS33 MicroStage

UP TO 4 NEW THOMSON 3/4" BALL BEARING PILLOW BLOCKS PB-12-A This is a Fixed Auction for up to 4 Brand New in the Box, Thomson Precision Steel Ball Bushing Pillow Blocks, No.PB-12-A - Dynamic Load Capacity - 200 lbf. PLEASE NOTE: Each Bid is for ONE Pillow Block. A coefficient of friction as low as .001.

Pulley sheave Heavy Duty 2A5.0 B5.4 QD SDS Browning Unused This is an unused heavy duty sheave made by Browning, part number 2A5.0 B5.4 QD SDS. 2 Groove, 5.75: Outside Diameter, 1.75 Flange Width. Uses QD bushing, (one is included with this item-bore: 1 7/16 inch) Keyway: 3/8 x 3/16 inch) Uses A and B belts OD: 5 3/4 inches Specifications: MFG: Browning Model: 2A50B54SDS Serial: Volts: Amps: Phase: Drive: Controls: Manuals: Air:&nbs

I googled the patent number and found the following info. The figures on the patent sketches looks slightly different than the piece. Patent number: US 3497806

You are purchasing 15 Heyco Strain Relief Bushings that are Heyco Part Number Strain Relief 7P-2. The bushing is designed for a panel thickness of .125 inches. Straight-Thru for Round Cables .660" (15,9 mm) to .750" (19,0 mm) Mounting Holes •Protects the lifeline of your electric/electronic products by absorbing the forces of pull, push, and twist that may be exerted on the flexible power cord.

You are purchasing 15 Heyco Strain Relief Bushings that are Heyco Part Number 7N-2. The bushing is designed for a panel thickness of .062 inches. Straight-Thru for Round Cables .660" (15,9 mm) to .750" (19,0 mm) Mounting Holes •Protects the lifeline of your electric/electronic products by absorbing the forces of pull, push, and twist that may be exerted on the flexible power cord.

You are purchasing 15 Heyco Strain Relief Bushings that are Heyco Part Number Strain Relief 6P3-4. The bushing is designed for a panel thickness of .125 inches. Straight-Thru for Round Cables .550" (15,9 mm) to ..625" (19,0 mm) Mounting Holes •Protects the lifeline of your electric/electronic products by absorbing the forces of pull, push, and twist that may be exerted on the flexible power cord.

NEW 720-051 Hot Surface Ignition Gas Valve with LP Conversion Kit Option... New in Box with instructions... Comes with the LP Conversion Kit Option and 3/4 by 1/2 Inch bushing and 2QTY - 1/2 Inch black plugs...

Genuine U.S. Military Issue Surplus   Lot of 5 - Threaded Brass Pipe Bushings   We are not sure who manufactured this part, we came up with the following.... Allis Chalmers Corp.

UP TO 7 NEW BIMBA 1" STAINLESS AIR CYLINDERS D-28873-A-1 This is an Auction for up to 7 Brand New Pneumatic Bimba Front Nose Mounting Double Acting Air Cylinders, Model #D-28873-A-1 with 1 inch of stroke and a .250" piston threaded on the end. Each Bid is for ONE Cylinder. Cylinder measures .81" Diameter and has 3/4 Bore.

NEW BIMBA 3/4" PANCAKE AIR PNEUMATIC CYLINDER FO-090.75-4MTV You are bidding on a New Pneumatic Bimba Double Acting Pancake Air Cylinder, Model # FO-090.75-4MTV with 3/4 Inch of stroke, 1 1/16" Bore, and a 1/2" Male rod end piston. Cylinder measures 1 5/8" High x 2" Diameter. Featur

NEW BIMBA PANCAKE 1" AIR PNEUMATIC CYLINDER FO-041-3FHDLM4 You are bidding on a New Pneumatic Bimba Double Acting, Single End Rod Pancake Air Cylinder with Screw clearance holes back and mounted holes front - with magnetic sensing, Model #FO-041-3FHDLM4 with 1 Inch of stroke, 3/4" Bore, and a 5/16" piston. Cylinder measures 2 1/2" High x 1 1/2" Diameter. Features Force is .4 x air pressure Heavy duty rear head Body - 304 Stainless Steel Heads - Anodized Aluminum Alloy Pist

UP TO 2 BIMBA 1" DOUBLE END AIR CYLINDERS FSD-041-M You are bidding on up to 2 Pneumatic Bimba Double Acting, Double End Magnetic Sensing Pancake Air Cylindesr with rear and front Threaded mounting holes, Model # FSD-041-M with 1 Inch of stroke, 3/4" Bore, and a 5/16" piston. Magnetic Sensing Body - 304 Stainless Steel Heads - Anodized Aluminum Alloy Piston Rod - Ground and Polished 303 Stainless Steel Piston Seals - Buna N Rod Bushing - Oil Impregnated Bronze Rod Seals - Buna N O-

You are bidding on up to 3 Pneumatic Bimba Double Acting, Single End Rod Pancake Air Cylinders with Screw clearance holes both ends - with magnetic sensing, Model #FO-041-M with 1 Inch of stroke, 3/4" Bore, and a 5/16" piston. Cylinder measures 2 1/2" High x 1 1/2" Diameter. Each bid is for ONE Cylinder.

UP TO 2 BIMBA 1/2" PANCAKE AIR PNEUMATIC CYLINDERS FT-040.5-4M4 You are bidding on up to 2 Pneumatic Bimba Double Acting, Single End Rod Non-Rotating Pancake Air Cylinders with clearance holes both ends, Model # FT-040.5-4M4 with 1/2 Inch of stroke, 3/4" Bore, and a 3/16" piston. Cylinder measures 2 1/2" overall Length and 1 1/2" Diameter. PLEASE NOTE: Each bid is for ONE Cylinder.

BIMBA 3/4" PANCAKE AIR PNEUMATIC CYLINDER FO-090.75 You are bidding on a Like New Pneumatic Bimba Double Acting Pancake Air Cylinder, Model # FO-090.75 with 3/4 Inch of stroke, 1 1/16" Bore, and a 1/2" piston. Cylinder measures 1 5/8" High x 2" Diameter. Features Force is .9 x air pressure Body - 304 Stainless Steel Heads - Anodized Aluminum Alloy Piston Rod - Ground and Polished 303 Stainless Steel Piston Seals - Buna N Rod Bushing - Oil Impregnated Bronze Rod Seals -

UP TO 6 NEW BIMBA 1" STAINLESS AIR CYLINDERS 041-DB W/BUMPERS This is an Auction for up to 6 Brand New Pneumatic Bimba Front Nose Mounting Double Acting Air Cylinders with Bumpers, Model # 041-DB with 1 inch of stroke and a 1/4"(.250) piston threaded on the end. Each bid is for ONE Cylinder. Cylinder measures .8" Diameter and has 3/4" Bore.

BIMBA 1/2" PANCAKE AIR PNEUMATIC CYLINDER FO-090.5 This is an Auction for a Pneumatic Bimba Double Acting, Double Acting Pancake Air Cylinder with Screw clearance holes bottom and top, Model # FO-090.5 with 1/2 Inch of stroke, 1 1/16" Bore, and a 1/2" piston. Cylinder measures 1 3/8" High x 2" Diameter. Features Force is .9 x air pressure Body - 304 Stainless Steel Heads - Anodized Aluminum Alloy Piston Rod - Ground and Polished 303 Stainless Steel Piston Seals - Buna N Rod Bushing -

UP TO 3 NEW BIMBA 3/4" STAINLESS SPRING RETURN AIR CYLINDERS M-040.75 This is an Auction for up to 3 Brand New Pneumatic Bimba Front Nose Mounting Single Acting Spring return Air Cylinders, Model #M-040.75 with 3/4 inch of stroke and a Stainless .250" piston threaded on the end. Each Bid is for ONE Cylinder. Cylinder measures .81" Diameter and has 3/4 Bore.