3 4 keyed shaft for sale, brand-new and used.

New Casappa Polaris Motor 1.58 cube in / rev, 3/4 keyed shaft drilled and tapped to 5/16-UNC-2 with anti cav cover

Char-Lynn 103 1028 007 hydraulic motor. Been sitting on shelf a long time. Time to clean house.

Century 1 HP Condenser Fan Motor, PSC, 1075 Nameplate RPM, 200-230/460 V, Frame 48Y FC1106F/3RCT4 item may not ship in original box.

MP Pumps FLOMAX 8 Cast Iron PUMPAK — 6000 GPH, 40 PSI, 2 x 2 FLOMAX 8 self-priming centrifugal pumps are capable of creating vacuum sufficient to lift liquids from heights up to 25' above the source. Once primed, the pump's built-in flkapper valve will maintain a full column of liquid in the suction line. A FLOMAX PUMPAK is a fully assembled and run tested pump end that can be easily coupled to any 3 or 5.5 HP gasoline engine standard 3/4" keyed shaft engine.

Store Policies - Payment | Returns | Shipping | Contact Us |

MP Pumps FLOMAX 8 Cast Iron PUMPAK With Bearing Pedastal, 3/4" keyed shaft. — 6000 GPH, 40 PSI, 2 x 2 FLOMAX 8 self-priming centrifugal pumps are capable of creating vacuum sufficient to lift liquids from heights up to 25' above the source. Once primed, the pump's built-in flapper valve will maintain a full column of liquid in the suction line.

A. S. Smith DC MOTOR Seller Refurbished NPL-884-286, 21737800 DC MOTOR Clear Picture of label, is off of a new motor.

This is a very nice running General Electric motor from a 9" South Bend lathe. This is original from South Bend. It is a 1/2 HP 1725 RPM single phase 110/230 volt wired for 110 volts and controlled by the original Furnas forward/reverse drum switch.

The unit was never installed. The information below was taken from another website. Please confirm this is the correct size/model before purchasing.

Store Policies - Payment | Returns | Shipping | Contact Us |

Store Policies - Payment | Returns | Shipping | Contact Us |

Haldex Barnes Hydraulic Motor Mfr. Number: 1821063 Type: Bi-Rotational Pressure Balanced Displacement (Cu.In/Rev.): 0.671 Nominal GPM @1200 RPM: 4.2 GPM @ 1800 RPM & 1000 PSI: 5.12 GPM @ 3600 RPM & 1000 PSI: 10.25 Maximum Continuous PSI: 4000 Maximum Intermittent Pressure: 4400 PSI Minimum RPM: 500 Maximum RPM: 3600 Ports Inlet/Outlet: 7/8-14 Rotation: Reversible Shaft Extension: 3/4" x 1" Keyed Housing Material: Aluminum Mounting: 2 Bolt SAE A Made in USA FREE SHIPPING! (3365)

Call Brett At 309-261-5695 for issues or questions. 70 shelf Parker 110A-036-AS-0 Hydraulic Motor 3.6 CU In./Rev 1" Shaft, 7/8"-14 Port. NEW technical Specs

Genuine U.S. Military Issue Surplus Pump Shaft Sleeve (NOS) (NOS) = New Old Stock  We are not sure who made this item, we cam up with the following.....

This pump was very lightly used on a large Log Splitter. It was way too much pump for a log splitter, so I replaced it with a 2 stage pump. It was removed in running condition & is guaranteed to be fully functional, but it is used, so that is the extent of the guaranty.

Model Number H191Cross Reference Number HP 1/3RPM 3450Volts 200-230/460Max Amps 1.3-1.4/.7Service Factor 1.15Frame 56CShaft Dia. & Length Shaft KeyedMotor Type

Maximum Security Keyed lock with:1. Case-Hardened 11/32" Steel Shaft2. Solid Brass Case3.

Brand New sealed in original box Direct Drive Blower Motor Motor Application HVAC/R Motor Sub Application Direct Dr Fan/Blower Motor Design Split-Phase Motor Enclosure Design Open Dripproof HP 1/6 Nameplate RPM 1140 Voltage 115