3.5 mpa to psi for sale, brand-new and used.

The Murphy 0-75 PSI Mechanical Pressure Swichgage 2.5" A25P-75 is a diaphragm-actuated pressure-indicating gage with built-in electrical switch for tripping alarms and/or shutdown devices. This rugged, built-to-last instrument is face sealed from the environment by the unique combination of a polycarbonate case and lens, a polished stainless steel bezel and O-ring seals. Accuracy and protection from moderate overpressure is assured by a unique, unitized diaphragm chamber.

1/2 ” x 50’ PARKER PARFLEX 55LT-8 LOW TEMP -70°F to +212°F HOSE 2000 PSI SAE 100R7 You are bidding on a 50 foot roll of

New Yokogawa DP harp Pressure Transmitter With Chemical Seal Measuring System with Capillary (see pictures) A chemical seal measuring system is made up of a diaphragm seal attached to a pressure measuring instrument (pressure transmitter). This systems also include a capillary separating the diaphragm seal and measuring instrument which allows for remote reading. In all cases, the components of the chemical seal measuring system must not be separated.

This listing is for 5pcs of Fibreflex MT-6746 the pieces are approximately 8 3/4" X 7 3/4" 1/32" thickfree shipping on orders over $50. NON-ASBESTOS BEATER ADDITION GASKET MATERIAL Maximum Service Temperature: 350F FIBREFLEX MT-6746 is an economical cellulose based gasket material bounded with a blended NBR-reinforced cellulose binder exhibiting very good crush resistance at high flange pressures. This material may be used for sealing oils, fuels, and

Max. Fluid Flow: 5 GPM (18.9 lpm)Max. / Min.

831-8 1/2" x 6' Multipurpose Heavy Duty rubber hoseIdeal for petroleum-based fluids and air Application: Pneumatic Petroleum base hydraulic fluid and lubricating oils Petroleum

NEW Qualiflow AFC 260 HCl 200 sccm Mass Flow Controller (MFC), ASM PN: 54-106858A81 Comes with what you see in the pictures. If you don't see it, you probably wont get it. Specifications are from Qualiflow and may vary slightly due to upgrades, options, or revisions this unit may or may not have.

NEW Qualiflow AFC 260 H2 300 sccm Mass Flow Controller (MFC), ASM PN: 54-117817A39 Comes with what you see in the pictures. If you don't see it, you probably wont get it. Specifications are from Qualiflow and may vary slightly due to upgrades, options, or revisions this unit may or may not have.

Specifications: P/N : 60.0008.65 Rated pr. : 280 bar – 28 MPa – 4050 psi Permiss.press. : 310 bar – 31 MPa – 4500 psi Outlet : 3/8 F

REZI-WELDTM GEL PASTE Gel Consistency-Thixotrophic, Multi-Purpose Construction Epoxy DESCRIPTION REZI-WELD GEL PASTE is a high viscosity, rapid setting, thixotrophic, structural, epoxy-based, chemical anchoring/bonding adhesive and injection resin. REZIWELD GEL PASTE provides high mechanical properties and bond strength to concrete and various other substrates. REZI-WELD GEL PASTE is a twocomponent, moisture insensitive construction epoxy, which can be troweled, brushed, injected, or pumped.

We do honor our 14 day return policy, if you should get an item that does not work, unless otherwise stated in that items description. However, we do assume that all our items were in working condition or were stock in a storeroom at the time the factory closed. WHAT YOU SEE IN THE PICTURES, IS WHAT WE SEND TO YOU!!!!

We do honor our 14 day return policy, if you should get an item that does not work, unless otherwise stated in that items description. However, we do assume that all our items were in working condition or were stock in a storeroom at the time the factory closed. WHAT YOU SEE IN THE PICTURES, IS WHAT WE SEND TO YOU!!!!

We do honor our 14 day return policy, if you should get an item that does not work, unless otherwise stated in that items description. However, we do assume that all our items were in working condition or were stock in a storeroom at the time the factory closed. WHAT YOU SEE IN THE PICTURES, IS WHAT WE SEND TO YOU!!!!

We do honor our 14 day return policy, if you should get an item that does not work, unless otherwise stated in that items description. However, we do assume that all our items were in working condition or were stock in a storeroom at the time the factory closed. WHAT YOU SEE IN THE PICTURES, IS WHAT WE SEND TO YOU!!!!