3200 200 for sale, brand-new and used.

This is a 3200' (~1 lb.) spool of 30 awg. Copper wire. Natural/amber color, non-solderable enamel/insulation, which must be removed before soldering.

good used square d 3 pole q2l 3200 200 amp 240 volt 10k interrupting breaker  free shipping call with questions 920 755 4261 see my other listings  I will remove the wire before shipping 

good used 200 amp 3 pole square d q2l 3200 breaker call with questions 920 755 4261 see my other listings will remove wire before shipping

ONE SCHEMATIC ONE PRICE $3.99* FROM ANY MAKER Free 2D Boardview file if available TOO!

var itemNumber = window.ebayItemID ?

SKU:*flz-120514-011 2M420 is a cost effective, high performance bi-polar two phase micro-stepping drive applying pure-sinusoidal current control technique. It is best suited for the applications that desired extreme low noise and heat. It operates well in an environment, where electricity supply experience instability and fluctuation.

FANUC A06B-6107-H003 SERIES A 2.7kW RJ3 SERVO AMPLIFIER ~*CAT NO : A06B-6107-H003*~ ~*SERIES : A*~ ~*RATED INPUT : 200-240V*~ ~*2.7kW*~ ~*MAXIMUM OUTPUT CURRENT*~ *J1 : 13.4A* *J2: 13.4A* *J3: 6.5A* *J4: 6.5A* *J5: 6.5A* *J6: 6.5A 53A* ~*MANUAL NO : ------*~ ~*STANDARD : EN50178*~ ~*FANUC A16B-3200-0610/10E PC BOARD*~ ~*FANUC A20B-2101-0236/03C PC BOARD*~ ~*~*ITEM IS VERY CLEAN!! SEE PICUTRES FOR MORE INFORMATION~*~ ~~~*~GUARANTEED NOT DOA~*~~~

Concepts Industrial

Schneider Electric Variable Frequency Drive - Altivar 212 ATV212HU30M3X 3kW/3HP This product is new without packaging or documentation, the documentation is available from the manufacturers web site. This unit was purchased for a for a project that was never started, it has been powered on, tested and reset to factory defaults. Specs are from manufacturers web site: Main

Overview The MA860H is a high performance microstepping driver based on pure-sinusoidal currentcontrol technology. Owing to the above technology and the self-adjustment technology (self-adjust current control parameters) according to different motors, the driven motors can run with smaller noise, lower heating, smoother movement and have better performances at higher speed than most of the drivers in the markets. It is suitable for driving 2-phase and 4-phase hybrid stepping motors.

Key Features High performance, cost-effective Supply voltage up to 50DC Output current up to 4.5A Self-adjustment technology Pure-sinusoidal current control technology Pulse input frequency up to 300 KHz TTL compatible and optically isolated input Automatic idle-current reduction 16 selectable resolutions in decimal and binary, up to 51,200 steps/rev Suitable for 2-phase and 4-phase motors Support PUL/DIR and CW/CCW modes Short-voltage, over-voltage, over-current protections

Xinje 3 Phase Stepper Drive DP-508S-L DP-508S Up to 80VDC 5.0A 200Hz New

Xinje 2 Phase Stepper Drive DP-153 Up to 30VDC 1.5A 200Hz 128 Subdivision New Features:

Xinje 2 Phase Stepper Drive DP504-L Up to 40VDC 5.0A 200Hz 200 Subdivision New

Xinje 2 Phase Stepper Drive DP508A-L Up to 80VDC 5.0A 200Hz 200 Subdivision New

Xinje 3 Phase Stepper Drive DP-7022 Up to 220VAC 7.0A 200Hz 300 Subdivision New