5 inch pulley for sale, brand-new and used.

WELCOME TO OUR AUCTION. WE INVITE YOU TO BID ON THIS SOLID BRASS CABLE PULLEY. THE PULLEY HAS A 1/2 INCH HOLE WITH 7/16 INCH GROOVES.

Up for Auction is a USED Campbell Okmulgee, OK, Wire or Rope Pulley Block - Combination Type Pulley. Has a 3,000 pound working load, weighs about 8 lbs, made of aluminum alloys with steel shafts and bearings. This is a Heavy Duty Professional / Industrial / Utility tool used when installing the large wires onto electrical poles in our neighborhoods and for threading wire or rope overhead from pole to pole, building to building or tree to tree.

2010UD6G.13.40 New Sanyo Denki, Ball Bearing, 2 Phase, 42MM Sq. (1.65 inch sq.), 5.3 OHM, 1.8 Degree Step (200 Steps per Revolution), Stepper / Stepping Motors, Part Number 103H5208-10U41. Each bid quantity is for a Factory Tray of (20) Motors.

2018UD6G.2.96 New T&L (SinoTech), Ball Bearing, 42MM Square (1.65 inch sq.), 1.8 Degree Step (200 Steps per Revolution), Stepper / Stepping Motors, Part Number 42BYG401 - 06A, or 548001017, or 548-001-017. Each bid quantity is for Four (4) Motors. You may bid / buy any number, up to the total quantity available above.

2013UD6G.3.12 New T&L (SinoTech), Ball Bearing, 42MM Square (1.65 inch sq.), 1.8 Degree Step (200 Steps per Revolution), Stepper / Stepping Motors, Part Number 42BYG401 - 04A, or 548001016, or 548-001-016. Each bid quantity is for Four (4) Motors. You may bid / buy any number, up to the total quantity available above.

2005UD6G.68 New Sanyo Denki, Ball Bearing, 2 Phase 42MM Square (1.65 inch sq.), 5.3 OHM, 1.8 Degree Step (200 Steps per Revolution), Stepper / Stepping Motors, Part Number 103H5208-10U41. Each bid quantity is for One (1) Motor. You may bid / buy any number, up to the total quantity available above.

Qty 1, Used Flexidyne drive, is setup for flat belt. Shaft input size 1-5/8, Belt pulley size 1.356, 6 inch scale for Ref only, not included. Please use shipping calculator

Westinghouse AC motor. Thermally protected continuous duty. 5.1amp.

Reconditioned, continuous duty, one third HP, 220V, 2.8 ampere electric motor with 1725 rpm splined arbor and 2.2 Outside Diameter sheave. See photos for condition and exceptions. About a 5 inch span (center to center) on the mounting plate.

MMTC INCLIM-50 GEAR BOX WITH 60 TO 1 RATIO DOUBLE PULLEY ON IN SIDE 3 INCH LONG ARM CENTER TO CENTER ON OUT ARM IS WELDED ON GREY FINISH MADE IN TAIWAN WEIGHT 19 POUNDS Please email any questions.

Please READ EVERYTHING BEFORE bidding. This auction is for; 1 - Congress Drives Division, Acme Precision Products, Inc. - Congress Standarized Pulley.

Please READ EVERYTHING BEFORE bidding. This auction is for; 1 - Congress Drives Division, Acme Precision Products, Inc. - Congress Standarized Pulley.

UP FOR BID IS A USED SINGLE GROOVE SOLID METAL STAMP V-BELT PULLEY/SHEAVE OD 5 3/4". INFORMATION: OD: 5 3/4 INCHESAPPROX GROOVE WIDTH: 1/2 INCHBORE: 5/8 INCH WITH KEYWAY NO SET SCREWOUTSIDE WIDTH: 1 INCH PICTURES ARE OF ACTUAL ITEM PLEASE USE FOR FULL DESCRIPTION. PAYMENT THRU PAYPAL ONLY.

Please READ EVERYTHING BEFORE bidding. This auction is for; 1 - Chicago Die Casting Mfg. Co.

This is a Browning BK36x5/8 Pulley. It has a 5/8 inch bore. One groove.

Browning pulley model # BK57X1. This has a 1 inch bore. There is 1 groove for 1 belt.

You are viewing a Browning 2AK25 pulley. This item is in good to very good condition. These sizes are approximate: 7/8 bore 3/16 keyway 2.5 inch diameter

Pulley sheave Heavy Duty 2A5.0 B5.4 QD SDS Browning Unused This is an unused heavy duty sheave made by Browning, part number 2A5.0 B5.4 QD SDS. 2 Groove, 5.75: Outside Diameter, 1.75 Flange Width. Uses QD bushing, (one is included with this item-bore: 1 7/16 inch) Keyway: 3/8 x 3/16 inch) Uses A and B belts OD: 5 3/4 inches Specifications: MFG: Browning Model: 2A50B54SDS Serial: Volts: Amps: Phase: Drive: Controls: Manuals: Air:&nbs

You are viewing a Browning AK 20 double pulley in good condition. These sizes are approximate: 5/8 bore 3/16 keyway 2 inch diameter Because many of the items have been gently used, please expect some estate wear. All items have been washed and cleaned up.

Up for sale is a New never installed Carrier WeatherMaster 8.5 Rooftop Heat Pump AC Unit. This unit was purchase new but never installed and now is up of sale for local pickup or buyer & seller arrange all freight shipping. There are some dings to the unit because it was delivered and handle to be installed but it never happen.