Tricks & Secrets of Old-Time Machinists: Hints and Kinks Provided by the Readers of American Machinist Magazine in 1915, originally published in American Machinist Magazine, compiled, edited and published by Lindsay Publications, 2009. 5 1/2 x 8 1/2 paperback, 96 pages. ISBN 1-55918-383-7.
Lagged pulley Mining Grade Body is 72 inches wide by 24 inches in Diameter Includes 5 and 1/2 inch shaft with SKF bearings number 532. Condition is very good with limited use. I will palletize and strap down for no extra charge.
2016UD6G.74 New T&L (SinoTech), Ball Bearing, 42MM Square (1.65 inch sq.), 1.8 Degree Step (200 Steps per Revolution), Stepper / Stepping Motors, Part Number 42BYG401 - 06A, or 548001017, or 548-001-017. Each bid quantity is for One (1) Motor. You may bid / buy any number, up to the total quantity available above.
This is a real nice original cast iron pulley for an International Harvester Famous, Titan, or Mogul hit and miss or throttle governed gas engine. It is in excellent condition with no cracks, breaks, or repairs of any kind except for two cracks in the spokes right by the hub. I don't think this would hurt anything to use it like this or it would be a great candidate for stitching.
This is a rather hard to find original cast iron pulley for a Fuller and Johnson hit and miss or throttle governed gas engine. It is in good used condition with no cracks, breaks, or repairs of any kind. It measures 8 inches in diameter with a 4 1/2 inch face.
This is a rather hard to find original cast iron pulley for a hit and miss or throttle governed gas engine. It is in good used condition with no cracks, breaks, or repairs of any kind. It measures 8 inches in diameter with a 4 1/2 inch face.
This is a real nice original cast iron pulley for a York hit and miss or throttle governed gas engine. It is in excellent condition with no cracks, breaks, or repairs of any kind. It measures 12 inches in diameter with a 5 inch face.
This clutch pulley is made by Edgemont Machine Company, & is a bolt on style clutch pulley. The Pulley is 16 inches diameter. The bolt on plate is 12 & 3/8 diameter.
This is a rather hard to find original drive pulley for a Pickering or other make of governor. These governors were commonly used on steam engines and some larger gas engines and tractors. It is in excellent used condition with no cracks, breaks, or repairs of any kind.
Up for auction is a pulley for a David Bradley tractor (or others) that have a 5/8 inch shaft. Will need cleaned up some. Shipping will be10.00 for USPS Priority Mail Shipping Shipping will be combined as possible.
You are viewing a 2.5 inch pulley with a 5/8 bore Good Condition Because many of the items have been gently used, please expect some gentle wear. Payment Option: I accept Pay Pal. Your prompt payment is great
I have for your buying pleasure one pulley 5 inch in diameter with a 1/4 inch wide grove. There is a sealed bearing in the center of this pulley that turns smooth and free, with a bolt hole of about 1/4 of an inch in diameter. On the pulley is (AN-210-5A) (similar pulleys I recently sold also had 4-3/8 and FORMICA on them).
Old and well-built 1/3 hp Westinghouse motor that was used with a small air compressor. It is mounted on a metal plate that can remain or be removed with your preference.
This is a pulley set for a Rockwell Delta 17-600 drill press, pulleys are 5 steps and includes both the motor and spindle pulleys. The bore on the motor pulley is 7/8, pulleys are in excellent shape. Powered by eBay Turbo Lister The free listing tool.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
