5000/300 for sale, brand-new and used.

var itemNumber = window.ebayItemID ?

Lot of Carbon and Metal film Axial Resistors 31 value over 26k parts, New,,,, quantities are approx, but very close to correct or correct Merry Christmas

2PCS 10A Power Stud Silicon Rectifier

GT402V = AC128, 2CY20, 2CY21, 2G377 Germanium transistorUSSRLot of 6 pcs New, never used / NOS / New Old Stock

This is new old store 2SC2428 FUJITSU transistors, you buy for 01 piece ( $10.99 ) I have 20 pieces are available now. I list the name of the 2SC2428 equivalent transistor for you easy looking for, Thank you for looking. Bipolar Transistor Cross-Reference Search Material = Struct =

REFLECTOR 4pcs 6P14P / EL84 / 7189 / 6BQ5 PENTODE TUBES NOS 6n14n, 6n14n-B, 6n14n-EB)

Untitled 1

Overview The MA860H is a high performance microstepping driver based on pure-sinusoidal currentcontrol technology. Owing to the above technology and the self-adjustment technology (self-adjust current control parameters) according to different motors, the driven motors can run with smaller noise, lower heating, smoother movement and have better performances at higher speed than most of the drivers in the markets. It is suitable for driving 2-phase and 4-phase hybrid stepping motors.

Key Features High performance, cost-effective Supply voltage up to 50DC Output current up to 4.5A Self-adjustment technology Pure-sinusoidal current control technology Pulse input frequency up to 300 KHz TTL compatible and optically isolated input Automatic idle-current reduction 16 selectable resolutions in decimal and binary, up to 51,200 steps/rev Suitable for 2-phase and 4-phase motors Support PUL/DIR and CW/CCW modes Short-voltage, over-voltage, over-current protections

Leadshine 2 phase stepper motor 8.5NM 6.0A 86HS85+M542-05 2 phase stepper drive M542-05

Xinje 3 Phase Stepper Drive DP-7022 Up to 220VAC 7.0A 200Hz 300 Subdivision New

Leadshine 2phase motor 4.5NM 3.0A 86HS45+M542-05 Leadshine 2phase stepper Driver M542-05

These motors are NOS (New Old Stock) and as have never been in service. The motors are of Industrial quality and sized for NEMA 34 mounts. The big bonus in this offering is that each motor includes a factory installed and Sealed RENCO Model RHS20D-5000-8mm--5-LD-0-M3 Encoder which connects to Gecko 320/340 Drives REALLY Well.