air powered fan for sale, brand-new and used.

Yihua 853D 5A BGA Rework Station + 75W Hakko Soldering Iron + 5amp DC Power Supply (Digital display Showing Temperature for HotAir Gun and Soldering Iron.) Yihua 853D 5A 3 in 1 Rework Station This is a Genuine Yihua manufactured High End Rework Station. The 853D 5A Model provides an all-in one solution for the Home Hobbyist and the Professional Engineer alike. It consists of a High quality Hot-Air Gun, 5 Amp 15V DC Power Supply, and a High Powered Japanese Hakko Brand 75W Soldering Iron.

Yihua 853AAA SMD, BGA Rework Station + Soldering Iron + PreHeater (Digital display Showing Temperature for HotAir Gun, Pre Heater and Soldering Iron.) Yihua 853AAA 3 in 1 Pre-Heating Rework Station This is a Genuine Yihua manufactured High End Rework Station. The 853DAAA Model provides an all-in one solution for the Home Hobbyist and the Professional Engineer alike.

This Aoyue 906 was used once or twice only. Works perfectly. It is in almost new condition.

Rework Station YIHUA 992D+ with Large LCD Screen and 3 Memory Set (Soldering ,Hot air reworks) from EU Stock YIHUA-992D+ soldering rework station has a wide application range. It is suitable for soldering or de-soldering a variety of electronic components, such as SOIC, CHIP, QFP, PLCC, BGA, SMD, etc. This equipment can be used for thermoshrinking, paint drying, adhesive removal, thawing, warming, plastic welding etc.

Brushless fan for Hot Air Handle for Yihua Rework Stations from EU Stock Replacement fan for all Yihua Rework Stations with brushless fan hot air reworks. Attention ! Also it is suitable for any similar rework station's brands like as LionKing, Baku, Lukey and others which used similar brushless fan into hot air handle.

NEW DIRECT FROM JC METAL FABRICATION INC. INDUSTRIAL CURING BATCH OVEN NATURAL GAS OR PROPANE WITH ONE YEAR MANUFACTURER WARRANTY Built to order--- build time is 4-8 weeks WE SHIP NATION WIDE NEED A CUSTOM OVEN ? CALL FOR A QOUTE 1-231-832-3551 This industrail batch oven is desig

Brought to you by Ebay's largest seller of NEW, Used and Rebuilt Maytag engine parts. Over 10 years in the business and with the last couple being spent a lot on Ebay we are quickly becoming one of the top Maytag sellers out there. Your one stop shop for Parts relating to Antique Maytag Gas Engines.

This oven was removed working from an active Quiznos restaurant at the University of Florida. It has been fully tested with all features working and is warranted for 14 days. The cart shown is available for no additional cost to the buyer, however, it results in significant increased shipping cost and is in very poor condition, so is included only at the buyer's option and additional shipping expense.

ACDID151491 ACDMA150 ACDCA53219 ACDSEA ACDSP9416 ACDTY1 ACDGC PeSAMember

Lincoln 1302 Conveyor Oven 240 VAC 60 HZ 1 PHASE No Crumb Trays for the conveyor belt. Tested and works great. Manufacturer Standard Features: AIR IMPINGEMENT uses hot air under pressure which surrounds food with small jets of hot air.

DD36FA Centrifugal downblast belt drive exhaust fan with a 36.75" wheel. Air Volume: 2 - 21000 cfm Maximum SP: 3.5" wg. @ standard air density FEATURES & BENEFITS A wide variety of motors are available to meet specific application needs.

Manufacturer information: SAM ® Fan Filter Units SAM Fan Filter Units are self-contained, motorized Supply Air Modules equipped with either HEPA or ULPA fi lters. SAM GS Units permit the removal of the HEPA or ULPA fi lters from roomside without removing the complete unit from the ceiling. GS Units feature an upstream gel channel on the fi nal fi lter which provides a leak-free seal between the fi lter and housing.

Pictures are examples of the actual pumps one unpacked for photos These pumps are new, crated and never

This Wire Chopping Machine System has been very lightly used for about 6 months; everything works great without any issue. Copper Separator system with 40hp granulator (MADE IN THE USA) This system will enable you to separate different density materials such as (copper / plastic), (aluminum / plastic), (aluminum / copper) and much more. The system comes with a 10hp blower to air-convey the copper chops from the 40hp granulator to the separation table.

var itemNumber = window.ebayItemID ?

51" x 35" (1300mm x 900mm) Double Heads Laser Engraving and Cutting System, Servo Motor, Available in the USA With Electric Up and Down Lifting Table, Rotary Fixture, 130W Laser Tube and Servo Motor. We support Spare Part - FDA - Warranty 2 years.