angle bolt for sale, brand-new and used.

This is for a custom made Stainless Steel Mounting angle L Bracket 1/8" thick. The bracket is about 3" wide x 3-1/2" tall x 3" deep with four 5/16" bolt holes. The holes on the bottom are 1/2" and 1-1/4" from out side edges to center of the holes, The top holes are about 3/8" on center from each edges.

Specification Model Number : EGH15CA+520mm Manufacturer : Hiwin

Ultra 44850 Jimmyproof Lock Double Cylinder Heavy Duty with Shutterguard - Key Lock inside and outside with Y-1 Keyway - solid brass 5 pin tumbler cylinder - includes right angle strike plate - vertical bolt resists forced entry by prying or kicking - the package says "key lock outside - thumb turn inside" but this is incorrect this lock is keyed on both inside and outside - this is a double cylinder lock

This E.R. Wagner plate caster has a polyurethane on aluminum wheel, a flat base with holes for bolting or welding to an object, and a swivel design to allow movement with a 360-degree change in direction. A total-lock brake simultaneously prevents rolling and restricts swivel movement when the foot-operated lever is depressed.

This E.R. Wagner plate caster has a pneumatic wheel, a flat base with holes for bolting or welding to an object, and a rigid design to allow movement in a back-and-forth motion. The plate caster's pneumatic wheel consists of a soft rubber tread on a three-piece steel hub with zinc plating, and it is fully inflated with air at 50 pounds per square inch (psi).

Vestil plastic corner guard. Designed to provide quick and easy corner protection. Made from 1/16-inches thick PVC plastic material features a non marking finish.

BRAND NEW Sandvik Coromant 880-D2300C4-03 Indexable Insert Drill + NEW SANDVIK COROMANT 435-810111-R28 CAPTO CLAMPING TOOL BLOCK Drill Specs: For more technical details go to: http://www.sandvik.coromant.com/en-us/products/pages/productdetails.aspx?c=880-D2300C4-03

Up for auction today is a lightly used SECO tool holder. The pictures shown are actual product you will recieve. Include 1 tool holder with bolt, and insert as shown.

Up for auction today is a new SECO tool holder. This has never been used, or installed. The first picture is actual product you will recieve.

SOLD AS BOX OF (30) PIECES DESCRIPTION: 2 Hole 90 Degree Corner Angle, 1-5/8" x 2-5/16", Type 316 Stainless Steel A variety of accessories lets you connect strut channel (not included) to each other as well as to other structures. All fit 1 5/8" wide strut channel. Fasteners not included.

Technical Specs : Item Condenser Fan Motor Motor Application HVAC/R Motor Sub Application Condenser Fan Motor Design PSC Motor Enclosure Design Totally Enclosed Air-Over HP 1/3 to 1/8 Number of Speeds 1 Nameplate RPM 825 Frame

Click Here. Double your traffic. Get Vendio Gallery - Now FREE!