break lathe for sale, brand-new and used.

Echoes from the Oil Country (American Machinist Memories), Volumes 1 through 5, originally published in American Machinist magazine in 1901-02. Republished by Lindsay Publications, Bradley, IL, 2005. Each book is 5 1/2 x 8 1/2 paperback.

Please ==READ ALL== before you buy: BOB’S ENDLESS SELTZER SYSTEM TM "You too can soon be making vanilla egg creams at home - chocolate too!" You Can Enjoy Making Real Seltzer, Egg Creams, Regular Sodas, Ice Cream Sodas, Fruit and Wine Spritzers, and More, Right in Your Own Kitchen! Tired of having flat store bought seltzer, or putting those wimpy CO2 charges

This is a used Large Aluminum Name & Model Plate and original mounting brads made in the USA came from a lathe motor It measures 3" X 4" Minor Wear and tear dust and dirt and rust and pitting but In Very Good condition. Some items will be partially disassembled for safe and economical shipping. Local Pick-up Available I will combine shipping on multiple purchases when practical.

This is a nice strong running used Dual Voltage AC Vintage Powr-Kraft 1/2 Horsepower Electric Motor.Made by Oak Electric Motors Inc. Burr Oak Michigan USA It is model 15YOB...1/2 Horsepower 1725 RPM 60 HZ single phase 115/230 Volt wired 115 6.0/3.0 amp. Clockwise (Right handed) rotation at shaft end Wear and tear rust dust and dirt but in good working good condition.

This is a Vintage Heavy High Quality Jacobs No. 1 jaw chuck on a # 1 Morse Taper shaft with key. Has wear and tear dust and dirt some nicks rust and pitting but in very good working condition.

This is a used Dual Shaft 1/3 Horsepower Delco Electric Motor from a Wood Lathe It is SOLD AS IS----it runs strong but makes some noise when starting and stopping--brushes worn??? This is not perfect but PRICED ACCORDINGLY!!! Both shafts are 1/2" diameter --round.

This is a really nice Vintage used 1/4 Horsepower Capacitor Start AC Motor from a wood lathe Made by Wagner Electric Corp in USA Wear and tear dust and dirt paint loss some tape on older cord but In good working shape It has a 5/8" diameter shaft with a keyway about 1 3/4" long. 1/4 Horsepower 1725 RPM 60 Hz single phase 110 Volt 4 amp wired Clockwise (right handed rotation) at shaft end. Comes with mounting plate, clips, bolts and key as pictured.

A PLATE FORM TRUCK BUILT IN THE 80sWAS HANDY TO TAKE DRUMS OFF A DELIVERY TRUCK,AND MOVABLE BENCH,LIFT THINGS ON TO MY WORK BENCH,MY SELF NO BACK BRAKING DONE,WILL LIFT 4"-TO 42" 500 LBS +,MOVE MY LATHE TWICE, ITS ABOUT 600LBS. DON'T BREAK YOUR BACK, USE A LIFT TRUCK.

This is a Heavy Very Very nice Baldor Motor Made in the USA LIGHTLY USED from a Wood Lathe. Retails new for over $300 Some dust and dirt wear and tear scratches but In good working shape. It has a 5/8" diameter keyed shaft @ 1 3/4" Long with key and an on/off switch.

Thousands of Used Metalworking and Plastic Machines & New Machine Tools Photos, Full Descriptions and Prices - Fast & Easy

This is a Heavy nice Baldor Motor Made in the USA USED from a Wood Lathe. Some dust and dirt wear and tear scratches but In good working shape.Some wear on shaft but very usable It has a 5/8" diameter keyed shaft @ 2 1/2" Long overall 1 7/8" with key slot Has an on/off switch.Is reversible currently wired Clockwise (right handed) at shaft end. The motor is single phase 1725 RPM Dual Voltage 115/230 wired 115 curr

Thousands of Used Metalworking and Plastic Machines & New Machine Tools Photos, Full Descriptions and Prices - Fast & Easy

Thousands of Used Metalworking and Plastic Machines & New Machine Tools Photos, Full Descriptions and Prices - Fast & Easy

Wilton MACHINIST MILL LATHE Tilting Rotating Vintage Bench Vise 4" Jaw CLEAN! Vintage Wilton Vise Holds Strong, Works Great 4 inch wide jaws4 inch Open Capacity Tilts past 90 degrees

YOU ARE BIDDING ON A OMNI MACHINIST VISE VICTOR MFG COMPANY BOSTON MA. I HAVE GONE OVER THE VISE AS BEST AS POSSIBLE. THE BOTTOM SWIVEL AND SIDE SWIVEL ARE VERY SMOOTH AND MOVES WITH EASE.

This is an older but smooth running Emerson 1/3 Horsepower motor Made in the USA from a Wood Lathe. Some dust and dirt wear and tear scratches but In good working shape.Some wear on shaft and slight in and out movement but very usable. Priced accordingly It has a 1/2" diameter flat shaft @ 1 1/2" Long overall.Is wired Clockwise (right handed) at shaft end.

HK-78