Leadshine 3 phase servo Drive HBS507 +573HBM20-1000 Motor 2.0N.m Update From HBS57 HBS507 Description: The HBS series offers an alternative for applications requiring high performance and high reliability when the servo was the only choice, while it remains cost-effective. The system includes a 3-phase stepper motor combined with a fully digital, high performance dri
The items are USED and sold AS-IS, but were removed from service in a working condition. Below are the detail from the manufacturers page and I believe all products are current. Stepper Motor The HT34-490 two-phase stepper motor is designed for use with the STAC6 series of stepper drives (120 VAC input versions only) and is suitable for a wide range of motion control applications.
The VPort 461 1-channel industrial video encoder with H.264 video compression algorithm provides the best video quality on the market, but with a smaller bandwidth requirement than other video compression standards. In addition, to meet various video stream requirements, the VPort 461 can provide up to 3 video streams simultaneously with H.264 and MJPEG compression format.
Durant-Eaton Electronic Predetermining Counter: ECLIPSE Series Item# 57701-481 DIGITAL BIDIRECTIONAL COUNTER PANEL MOUNT NPN/PNP INPUT 2 PRESETS 85- 265VAC 6-DIGIT 2 PRESETS BATCH COUNT Grainger has this same counter at over $550 list price!!! Eclipse series predetermining counters from Durant offer great functionality in a convenient 1/8 DIN pack
BES 516-300-S295/1.025"-S4 Ordering code: BHS003J Inductive sensor Strokemaster D12.7 mm L = 1.025" ±0.005" (26.04) DC, direct current PNP/Normally open (NO) Sn= 2 mm Flush (shielded) Characteristic data Assured operating distance Sa 1,6 Eff. switching distance Sr 2,00 mm Tolerance Sr ±10 % Hysteresis H max. (in % of Sr) 15 % Repeat accur.
3 in 1 High Power Zigbee module (I/O switch: Coordinator, Router and end Device) TI CC2530 + CC2590 Solution, Support Mesh Network Support High Power, Long range, Serial Port, Digital I/O, ADC Features: 1. 3 in 1 firmware: Coordinator, Router and end Device 2. TI CC2530 + 2591, High power mode 3.
Wavetek 75 Ohm Rotary Attenuator Pair 0- 70 dB in 10dB steps and 0-10 dB in 1 dB steps 0-10 dB Attenuator: Part Number : Wavetek 7510-05 VSWR: 1.1 Max dc - 500 MHz / 1.2 Max 500 MHz - 1000 MHz Rotation: Attenuator increases in clockwise direction Impedance: 75 Ohms Frequency Range: dc - 1000 MHz Insertion Loss: 0.2 dB max Angle Between Steps: 30 degrees Maximum Input Power: 1 watt
New, never used, was stored with installed AA batteries. Batteries leaked -- the contact slightly corroded but are cleaned (see picture). Features Hand-Held and battery operated100kHz to 2900MHz measurement range (2060MHz for 3201)125 Ch/sec scan rate (12.5 Ch/sec for 3201)Built-in 2.9GHz frequency counter (2GHz for 3201)High sensitivity (-117 dBm max)Detects Wide band and Narrow band FM, AM and Single Sideband
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
