copper tube 1 inch for sale, brand-new and used.

"Hot Stamp Supplies for us Little Guys" This foil is TWO inches wide, for when you don't need 3 inch wide foil, and is hand-rolled down, from large master rolls, to 100 feet in length so they will work in a canister with the Kingsley auto foil feeder. Remember that most rol

Military - Surplus - High quality mil-spec wire braid. This braid is made from tin-coated-copper strands. It comes flat and can be used as a flat conductor, but it is made as a round hollow tube which allows it to be used as shielding over electrical conductors.

Copper Tubing Hanger 2.5 inch for 1 to 1.5 inch tube, Hardware, Guide and Spider. Similar tio Anvil copper tubing hangers CT-255. Service: For maintaining alignment of tubing through its axial expansion and contraction cycles.

"Hot Stamp Supplies for us Little Guys" This foil is hand-rolled down, from large master rolls, to 100 feet in length so they will work in a canister with the Kingsley auto foil feeder. Remember that most rolls from Kingsley, Howard, Jason, etc. are less than half as long at 40 feet;

"Hot Stamp Supplies for us Little Guys" Reclaimed from old Kingsley cardboard canisters, 35 feet long, which will now work in an aluminum canister (not included) with the Kingsley auto foil feeder. Remember that most rolls from Kingsley are 40 feet or less.

"Hot Stamp Supplies for us Little Guys" Mosaics and Rainbows (or virtually any foil with a design) are available at considerably higher cost than single colors foils. This foil is hand-rolled down, from large master rolls, to 100 feet in length so t

"Hot Stamp Supplies for us Little Guys" Please Note: this foil is hand-rolled down, from large master rolls, to 100 feet in length so they will work in a canister with the Kingsley auto foil feeder. Remember that most rolls from Kingsley, Howard, Jason, etc. are less than half as long at 40 feet.

"Hot Stamp Supplies for us little guys" Please Note: this foil is hand-rolled down, from large master rolls, to 100 feet in length so they will wo

"Hot Stamp Supplies for us Little Guys"

"Hot Stamp Supplies for us Little Guys" This foil is hand-rolled down, from large master rolls, to 100 feet in length so they will work in a canister with the Kingsley auto foil feeder. Remember that most rolls from Kingsley, Howard, Jason, etc. are less than half as long at 40 feet; ours are 100 feet long.

Up for sale is a lot of 30 1 1/2" X 6" Natick copper tube hangers. They have never been used, just sat on a shelf for years. Still in great shape.

About us Shipping

WK-666 Multi Copper Pipe Bender Tube bending Tool Kit with Tube Cutter Description: For 5mm,6mm,8mm,10mm,12mm. 1/4'' ,5/16'' ,3/8''&1/2''O.D.Tubing In blow-mold carrying case. Aluminum alloy wheel.

Uniweld 70028 Spring Tube Bender Set for 1/4-Inch, 3/8-Inch, 1/2-Inch, 5/8-Inch OD Soft Copper and Aluminum Tubing Features Spring Tube Bender Set 1/4in, 3/8in, 1/2in, 5/8in O.D Fast and professional looking free-form bending of soft copper and aluminum Spring slips over the tubing and prevents collapsing of the tube walls wh

The Lotoons Store NEW LDR 511 3110 Mini Tube Cutter Fits 1/8-Inch to 5/8-Inch Outside Diameter