copper tube 1 inch for sale, brand-new and used.

Copper Tubing Hanger 4 inch for 1 to 1.5 inch tube, Hardware, Guide and Spider. Similar tio Anvil copper tubing hangers CT-255. Service: For maintaining alignment of tubing through its axial expansion and contraction cycles.

Copper Tubing Hanger 2.5 inch for 1 to 1.5 inch tube, Hardware, Guide and Spider. Similar tio Anvil copper tubing hangers CT-255. Service: For maintaining alignment of tubing through its axial expansion and contraction cycles.

CT-300AL Hydraulic Expander Flaring Tool Hydraulic Flare Tube Expanding Tool Kit Six Easy steps: 1.Deburr inside of tube. 2.Anneal the tube if necessary(for hard or thickwall tube). 3.Screw the expander head on expander.

CT-100AL/ML Lever Tube Expanding Tool Copper Pipe Expander Kit Six Easy Steps: Deburr inside of tube. To create perfectly expanded tubing for soldering or brazing, you must use soft copper or fully anneal end of tube to be expanded. Pull expander handle up to 90-degree position.

CT-100A Lever Tube Expanding Tool Copper Pipe Expander Kit Six Easy Steps: Deburr inside of tube. To create perfectly expanded tubing for soldering or brazing, you must use soft copper or fully anneal end of tube to be expanded. Pull expander handle up to 90-degree position.

start_elivehelp_btncode end_elivehelp_btncode Check out my other items! This product is fabricated from pure stainless steel. The design incorporates an independ

This PMT, made by Adit, has a magnificent dynode string, and is the standard model I use to replace bad tubes of all types. They are of much higher quality than pretty much any other PMT, and are so easily adapted for niche applications and replacements that I don't really use any other type of this size. These are attached to a base made with solidly mounted surface mounted components.

FOR SALE IS A BRAND NEW WESTERN ENTERPRISES OXYGEN REGULATOR. DUAL RANGE FROM 1 TO 5 LPM OR 5 TO 15LPM. THE PART NUMBER IS M1-540-FM AND THE NSN IS 6680011746276.

Hydraulic Swaging HVAC Tool Kit Tube Expander 7 Lever Tubing Expander Tool Description

CT-300AL Refrigeration Hydraulic Expanding Tool Kit with Tube Cutter Six Easy steps: 1.Deburr inside of tube. 2.Anneal the tube if necessary(for hard or thickwall tube). 3.Screw the expander head on expander.

This is used and in good condition. It has two ports. Both of the ports are for 1 1/2 inch tube with Varian six bolt CF flanges.

var urlAddress = location.search; var frame = urlAddress.indexOf("ItemDescV4"); if(frame < 0) { var hashSpot = urlAddress.indexOf("hash=item"); if(hashSpot > -1) { var urlAddress = location.pathname; var slashSpot = urlAddress.lastIndexOf("/"); var ebayItemID = urlAddress.substring(slashSpot+1); } else { var itemFound = urlAddress.indexOf("item=")

I am selling all 20 connectors for $700.00 USD.