dia-m for sale, brand-new and used.

This is a brand new Shop Fox / Steelex Heavy Duty Triple Bearing Live Center with an MT4 Arbor. Here are the specs: HARDENED M2 STEEL GROUND FOR HIGH ACCURACY PRECISION HIGH QUALITY BALL BEARING CENTER SHAFT 60 DEGREE POINT #4 MORSE TAPER - MT4 .0004" ACCURACY 1439 Lb RADIAL LOAD 1200 RPM MAXIMUM SPEED 1.102" DIA CENTER POINT 2.520" DIA HEAD 7.244" OVERALL LENGTH WEIGHS 3 lbs. GREAT FOR METAL or WOOD TURNING Please study the picture & specs and email with any questions.

This is a brand new Shop Fox / Steelex Heavy Duty Triple Bearing Live Center with an MT3 Arbor. Here are the specs: HARDENED M2 STEEL GROUND FOR HIGH ACCURACY PRECISION HIGH QUALITY BALL BEARING CENTER SHAFT 60 DEGREE POINT #3 MORSE TAPER .0004" ACCURACY 1,012 # MAX RADIAL LOAD 1200 MAX RPM .984" DIA CENTER POINT 2.205" DIA HEAD 6.142" OVERALL LENGTH WEIGHS 2-1/8 LBS. GREAT FOR METAL or WOOD TURNING Thanks for viewing.

vernier not included all measurements are with a vernier and have not been converted to standard taper designations chech your measurements ask me questions will break uo lot make an offer on those you want. PS will not sell center without at least one adapter one each as follows; od taper 2.510-2.100 x 4 3/8 w/ 1.780 dia center x 1 3/4 6# 2.510-2.310 od 4 1/8 with #4 morse id 5# 2.380-2.220 x 3 3/8 od with #4 morse id 3 1/2# 2.300-2.220 x 3 5/8 with #4 morse id 3# #4 morse center 1.2

The Skinner Chuck Co., New Britain, Conn., USA, REF. No. 3412-M.

THIS AUCTION IS FOR A NEW CNC LATHE CHUCK ADAPTER PLATE A2-11. COULD BE A KITAGAWA CB21A11. SEE SPECS CHART BELOW IN RED!

Visit My eBay Store: toolyouup YOU ARE PURCHASING THE PICTURED HOWA 3 JAW CHUCK. IF YOU HAVE QUESTIONS ABOUT THIS CHUCK PLEASE CALL ME AT 937-475-3068 IT IS USED. 12" DIA IT IS LABELED: HOWA 9.005 HOO55M12 I USUALLY SHIP (95%) OF MY LISTINGS SAME DAY IF PAID FOR BY 3:00 P.M.

(2) BIG STEEL WORKHOLDING HOLD-DOWN CLAMPS MILLING MACHINES / MACHINISTS / MACHINE SHOPS Used and in very good condition; some surface rust. Large steel work holding holddown clamps, mostly for machinists and milling machine shop uses. Includes the swinging arm and its bolt as shown on one clamp.

(3) BIG STEEL WORKHOLDING HOLD-DOWN CLAMPS MILLING MACHINES / MACHINISTS / MACHINE SHOPS Used and in very good condition; some surface rust. Large steel work holding holddown clamps, mostly for machinists and milling machine shop uses. Longest one is 6" long, widest one is 1-3/4" wide, and they are 7/8" thick at their thickest.

ANTIQUE VALVE STEM SEAT CUTTER JIG, 3V-1A VERSATILE TOOL HOLDER CLAMP STEEL VISE FILE HOLDER / ROD HOLDER / SHAFT HOLDER PIPE HOLDER / TUBE HOLDER JIG, 3V-1A HANDTOOL Used and in very good condition. This antique tool was originally made as a Valve Stem Seat Cutter, Model 3V-1A (make unknown). It is also a very Versatile Steel Vise / Clamp Tool Holder / File Holder / Rod Holder / Tube Holder / Pipe Holder / Shaft Holder Jig Handtool.

TWO - BT50 CTA ULTRA-PRECISION COLLET CHUCK. Made by MST Corp. Japan, model # BT50-CTA10-105.

MOOSE TRADING LLC 251-650-2219

TEC A2F/-/V3880 Grip Dia. 28.5mm Lathe Jaws Set of 3 LR15 M FN8810380 dimensions: 28mm x 87mm long x 47.5mm tall 8.25mm diameter mounting holes, 40mm OC apart 10mm slot through the middle 20mm long block 28.5mm diameter grip

TEC A2F/-/V3880 Grip Dia. 53.9mm Lathe Jaws Set of 3 LR15 M FN8810390 dimensions: 28mm x 92mm long x 47.5mm tall 8.25mm diameter mounting holes, 40mm OC apart 10mm slot through the middle 20mm long block 53.9mm diameter grip

TEC A2F/-/V3880 Grip Dia. 66.6mm Lathe Jaws Set of 3 LR15 M FN8810310 dimensions: 28mm x 85mm long x 47.5mm tall 8.25mm diameter mounting holes, 40mm OC apart 10mm slot through the middle 20mm long block 66.6mm diameter grip

TEC A2F/-/V3880 Grip Dia. 34.9mm Lathe Jaws Set of 3 LR15 M FN8810330 dimensions: 28mm x 84mm long x 47.5mm tall 8.25mm diameter mounting holes, 40mm OC apart 10mm slot through the middle 20mm long block 34.9mm diameter grip

TEC A2F/-/V3880 Grip Dia. 44.4mm Lathe Jaws Set of 3 LR15 M FN8810300 dimensions: 28mm x 78mm long x 47.5mm tall 8.25mm diameter mounting holes, 40mm OC apart 10mm slot through the middle 20mm long block 44.4mm diameter grip

Boeing UT7020-3 / Lockheed DS616-6 Slotted Locator Bushing for 3/8" Pin FEATURES: Use with L Pins, T Pins, Shoulder Pins, or Ball Lock Clamps to align two holes without binding. Precision bushing with a tight tolerance in one direction and full relief in the perpendicular direction. SIZES: Available for 3/16 to 1" diameter pins (6 to 25mm in metric) — see Dimensions page for part numbers.