fixture clamp for sale, brand-new and used.

VULCAN FORGED CLAMP - SET OF FOUR Vulcan No 68 - Forged in USA "U' clamp or fork clamp used as fixturing strap for machining OAL - 9 inches Thickness approx 1.17 inch Width across forks 2.65 inch Slot Distance appox .90 inch Selling all four as a set Selling As Is and As Shown in the Enlosed Pictures

Universal key cutting machine for door and car key Cutting Machine Locksmith Equipment

This Ebay listing is for ONE 14 Pin Butterfly Package to 8 Pin Package Laser Diode Test Fixture / Clamp. We've had these sitting in a bin here for years.... I think they came from JDSU.

Universal key cutting machine for door and car key Cutting Machine Locksmith Equipment

Wire EDM Large Part Fixture All parts are made with 420 stainless steel and hardened to 45-55 RC (unless specified) precision ground +/-.0002" flat/parallel. 1- Fixture 2- Sloted clamp 5mm SHCS(stainless) for mounting clamps, and a stop 5mm set screws(stainless) for holding part Hieght is 2 inch, width is 2 inch, lenght is 6 inch part step is 1.25 inch X 1.25 inch (size may vary) The two screw counter bores are for 8mm x1.25 screws and they are 50mm apart.

Wire EDM Small Part Fixture Cost: $200 All parts are made with 420 stainless steel and hardened to 45-55 RC (unless specified) precision ground +/-.0002" flat/parallel. 1- Fixture 1- Sloted clamp 1- side clamp 4- 5mm SHCS(stainless) for mounting clamps, and a stop 3- 5mm SHCH(stainless) for holding part Hieght is 1 inch, width is 1.25 inch, lenght is 6 inch part step is .5 inch X .8 inch (size may vary) The two screw counter bores are for 8mm x1.25 screws and they are 50mm apart.

This is a very nice older unit that I went through & fixed up I replaced the bearings Added 2 stops Anodized the handle & dial Reground the v-block & added the clamp it will now indicate with in .0002 I am also including a taped fixture plate I have used this unit & it works as good as a new one witch will cost $2349.99 + TAX & shipping Any questions call Fred Creath at 847-888-2420

This fixture was used to sharpen the larger diameter “E” see link at bottom Its best suited for a surface grinder or on a tool and cutter grinder with a magnetic chuck. With some ingenuity I suppose you can adapt this for other styles but it’s made for the

BT30 UNIVERSAL HORIZONTAL VERTICAL CNC TOOL HOLDER TIGHTENING FIXTURE NEW! Product Code 202-2630 Product description Taper Size: BT30 H x L x W: 4.84 x 8.3 x 4" Product features Multiple usage on tool holder tapers NMTB (ISO), BT, DIN Efficiently designed for maximum protection of tool holder Enables strong gripping pow

var itemNumber = window.ebayItemID ?

Union Butterfield Grinding Fixture List No. 140 Catalog Number 69-30001 Universal Grinding Fixture with 3 Graduated Angle Adjustments and gage with clamp. This is a "spade drill insert" grinding fixture good for sizes above approximately 2" wide (diameter).

Description: SkandaLights® LV-PERF • Rugged perforated metal fixture head • Fixture head design aids in dissipation of heat • 10’ power cord permanently attached - plugs into a transformer with integrated 3 prong plug • Silver color • 50 watt MR-16 covered glass lamp included • European design combined with outstanding range of motion to direct light where desired • Designed to use MR-16 lamp to deliver good white light to il

"Being able to custom configure yo

Lot of 14 conduit locknuts and 13 fixture locknuts along with a 1" beam clamp and 1" to 3/4" reduce bushing. 10 locknuts are 1" 2 locknuts are 3/4" 2 locknuts are 1/2" Winner pays $3.00 s/

Four Skanda 9820 halogen light fixtures with clips for illuminating trade show booths, exhibits, and displays. Like new condition. Sold in pairs only - $100 pair or $200 for all four.

????? 998C Universal key cutting machine For door and car key Locksmith Equipment 110V

Made in the USA by K.O. Lee Co. This is a Universal Workholding Grinding Fixture in good condition.