flex tube for sale, brand-new and used.

This is a clean used in the original tube Ideal brand #31-631 Tuff Rod Extra Flex Glow Kit 12 feet long fiberglass electricians fishing pole---three 4' sections---one threded end has been broken off and there is no hook end

Attention Electricians and Handymen Introducing the new flex point tool. This tool was designed to aide in the installation of flexible metal conduit. This tool is a real time saver when "fishing" flex down walls that are filled with insulation or have backing in them for cabinets etc.

SWAGELOK SS-TH8TA8TA8-218 HOSE,SS BRAIDED FLEX TEFLON HOSE,1/2IN TUBE ENDS,218IN LENGTH Check out my other items!

Untitled Document

Listing is for both switches for a BV Pulsera C-Arm. These are the up down switches. Part numbers can be as follows Philips 4522-165-01114.1 (R) 4522-165-01113.1 (L) or Poly-Flex Part NO E2435-52 Poly-Flex Part NO E2436-52 These switches are unused and were going to be originally used to replace a set on a C-Arm here locally but the tube failed and the C-Arm was disposed of.

Stainless Steel Pressure Gauge Industrial Service Gauge Type 3005HL, Grade B (3-2-3%) Dial Size: 2-1/2"-63mm, 0-300Psi - 2000kPa • Stainless Steel case • Glycirin Filled. •

FOR SALE IS A BRAND NEW GARLOCK GARFLEX CONNECTOR. HAS 4 BOLT HOLES ON EACH END OF THE FITTING. PIPE SIZE FOR USE WITH THIS FITTING IS 2".

This is a New, Old Stock, Dwyer 1230-16-D Manometer Flex-Tube Well-Type Wall Mount Link provided for informational purposes only: http://www.dwyer-inst.com/Product/Pressure/Manometers/Stationary/Series1230-1235 Check out my other items!

This is a New, Old Stock, Dwyer 1230-12-D Manometer Flex-Tube Well-Type Wall Mount Link provided for informational purposes only: http://www.dwyer-inst.com/Product/Pressure/Manometers/Stationary/Series1230-1235 Check out my other items!

For sale: New in original bag (2) Dwyer Flextube M-1223-600-WM metric 300-0-300 Flex Tubes. Bags have been opened units were never used. All components are still in the original bags.

Loctite Red Super Flex High Temp RTV New Still in Original PackagePart# 596302.7 FL. OZ. 80 mL Makes gaskets that resist temperatures up to 600°F intermittently.

LOCTITE Hysol E-05MR is a general purpose two-component epoxy adhesive which develops high strength on a wide range of substrates. The gap filling properties make this adhesive system suitable for rough and poorly fitting surfaces made from metal, ceramic, rigid plastics or wood. Once mixed, the two component epoxy cures at room temperature to form an ultra

LOCTITE Hysol E-05CL is a fast-setting, toughened, medium-viscosity, industrial grade epoxy adhesive. Once mixed, the two-component epoxy cures at room temperature with low shrinkage and forms an ultra clear bondline with excellent peel resistance. When fully cured, the epoxy is resistant to a wide range of chemicals and solvents,