Power Input 830 W Voltage 115 V Hammering Speed Under Load - Setting I 0 - 3720 rpm Single Impact Energy - setting I 2.80 ft-lbs Dimensions 17" x 4" x 8.75" Weight 10.8 lb Chuck Style TE-C+ (SDS+) Double Insulated Yes Grounded No Variable Speed Switch Yes Drilling Performance up to 10 in. per min. in 4000 psi concrete with 9/16 in.
gainexpress This high quality professional digital manometer that measures gauge pressure and differential pressure (measures the difference between two pressures). This can also be use to measure gas a
Only have 3 prong electric range and 3 prong electric clothes dryer outlets at your house, you're not sure which one will power your new machine best and don't want to pay hundreds of dollars to have a welding machine outlet installed? Here is my special non-NEMA 10-50P and 10-30P to 6-50R plug adaptor. It allows you to plug in a welding machine...
Here is my NEMA 14-30 clothes dryer plug to common 3 prong receptacle adaptor. This adaptor uses both lines that your hot is hot and your white wire is also hot and green is ground. This adaptor makes it so you can use a common 120 volt 3 prong extension cord to move 220 volt power from one place to another.
Here is my NEMA 10-30 extension cord. It allows you to reach out away from your fixed wall plug an additional 10ft. Use on clothes dryers, welders, plasma cutters, air compressor and small electric stoves.
Here is my NEMA 14-30 clothes dryer plug to 220 volt receptacle adaptor. This adaptor uses both lines that feed your clothes dryer its power. The metal housing is grounded.
Here is my NEMA 10-50P to 6-50R plug adaptor. It allows you to move the oven and plug in a welding machine or plasma cutter. The cord is 4 to 5 feet long, the lines are both 8 gauge and the ground is 10 gauge, that makes it a "8/2 + 10ga" cord.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
