gauge adaptor for sale, brand-new and used.

Product Materials CABINET: heavy gauge stainless steel. All welded construction. FLANGE: 22 gauge stainless steel with exposed surfaces in architectural satin finish.

24 Volts A/C, 1.25 Amp GP Switching Current (Tested and Listed by UL® at 6000 Cycles – Inductive Load). Reed Component Device is Separately UL® Recognized at 2.5 Amps Max. Carry Current.

Up for consideration are SIX float switches made by Safe-T-Switch model SS1 The SS1 detects down stream clogs in condensate drains and interrupts the thermostat circuit to shut off the unit before flooding occurs. The Model SS1 installs inline at any downward slope from vertical to horizontal. It can also be installed

Snap On Cylinder Leakage Tester MT324 Brand New

var itemNumber = window.ebayItemID ?

VERY NICE USED LITTLE IF ANY AT ALL ENERPAC HC7206, Hose Assy, Hyd, 6 Ft ENERPAC Item Specifics ItemHydraulic Hose Assembly TypeHigh Pressure MaterialThermoplastic For Use WithEnerpac Cylinders, Pumps and Accessories Hose Inside Dia. (In.)1/4 Includes3/8" Male Coupler and Dust Cap ItemHydraulic Hose Assembly Length (Ft.)6 MaterialThermoplastic Max. Operating PSI10,000 TypeHigh Pressure CoverPolyurethane with Double Wire Braid Safety Factor4:1 Hose Ends3/8 (F)NPT x 3/8 Male Quick-Coupler

THIS LISTING IS FOR A HIGH PSI MANIFOLD CONSISTING OF THE FOLLOWING: ENERPAC GA3 GAUGE ADAPTOR POWER TEAM GAUGE 9040 ENERPAC CH604 MALE COUPLER ENERPAC CR400 FEMALE COUPLER ENERPAC CD411 DUST COVER THE UNIT IS NEW NEVER USED BUT IT HAS BEEN ASSEMBLED FOR USE. AS ALWAYS ITS GUARANTEED AND THE ITEMS IN THE PHOTO WILL BE THE ONES YOU RECEIVE

THIS LISTING IS FOR A NEW ENERPAC 30 TON LOW HEIGHT SET WHATS IN THE BOX? ENERPAC RSM-300 LOW HEIGHT CYLINDER (FLAT JAC) ENERPAC P39 ULTIMA HAND PUMP ENERPAC GA3 GAUGE ADAPTOR POWER TEAM GAUGE AND 6' HOSE W/ ENERPAC MALE COUPLER AND DUST CAP

THIS LISTING IS FOR A NEW 20 TON LOW PRO SET. THE SET INCLUDES THE FOLLOWING. ENERPAC RSM-200 LOW HEIGHT CYLINDER ENERPAC P392 PUMP AND 6' SAFETY HOSE ENERPAC GA2 GAUGE ADAPTOR ENERPAC GF230P GAUGE TONS AND PSI GUARANTEED AS ALWAYS AND THE ITEM IN THE PHOTO IS THE ITEM YOU WILL RECEIVE.

THIS LISTING IS FOR A ENERPAC 50 TON LOW HEIGHT SET. THE ITEMS IN THE PHOTO WILL BE EXACTLY WHAT YOU WILL RECEIVE. WHATS IN THE BOX?

Clark-66H Is 66 Ton Hydraulic Multi-Function Ironworker: The machine has been developed to perform following basic functions: Punching, Flat bar shearing, Notching, Angle and section cutting,

DIAL TEST INDICATOR GAUGE This Is A "Brand new" Precise Measuring Tool For Professionals And Hobbyists Demanding Ease Of Operation And High Quality Work Results. You Are

DIAL TEST INDICATOR GAUGE This Is A "Brand new" Ultra Precise Measuring Tool For Professionals And Hobbyists Demanding Ease Of Operation And High Quality Work Results. Yo

DIAL TEST INDICATOR & MINI MAGNETIC BASE This Is A"Brand new" Measuring Tool used In Milling And Lathe Applications And For Other Measuring Tasks. It Is A Small And Handy Instrument At A Reasonable Price.

GRANVILLE-PHILLIPS 275 MINI CONVECTRON GAUGE, ANALOG OUTPUT WITH 2 SET POINTS. Used and dismantled from decommissioned machine with some scratches. PLEASE FEEL FREE TO QUESTION OR REQUEST FOR DETAIL OF THE ITEM.

MicroManipulator 2230 Wafer Level Electromigration Test Station Prober Comes with what you see in the pictures. If you don't see it, you probably wont get it. Specifications are from MicroManipulator and are for a 2230 (non custom) model, as such, they may vary slightly due to upgrades, options, or revisions this unit may or may not have.

Here is my NEMA 14-50 and full KVA plug to 6-50R welding plug adaptor. It allows you to plug a welding machine or plasma cutter with a 6-50 plug into the 4 prong outlet. The cord is about 4 feet long, brand new and uses 8 gauge lines and a 10 gauge ground.

Here is my NEMA 14-50 and full KVA plug 4 foot extension cord. It allows you to reach a little further with a 14-50 plug into the 4 prong outlet. The cord is about 4 feet long, brand new and uses 8 gauge lines and 10 gauge ground and neutral wires.

Used Janda Model R2-100-24R Heavy Duty Rocker Arm Spot Welder: Throat Depth: 24" 100 KVA Cylinder Bore 4: 5" Capacity Mild Steel: 8 gauge Capacity Aluminum: 0.055" Features:

ImagicNest *{ padding: 0; margin: 0; } img{ border: none; } #wuMing{ background: none; background: #eee; } #wuMing .top{ height: 63px; padding-top: 30px; } #wuMing .logo{ background: url(http://www.yalldata.com//downloads/upzone/image/ImagicNest/newlisting/logo2.png) no-repeat; width: 516px; height: 63px; margin: 0; } #wuMing .bar{ margin: 28px 0 0; } #wuMing .nav{