high voltage isolation transformer for sale, brand-new and used.

ACME DTGB-063-4S DRIVE ISOLATION TRANSFORMER 63 KVA 3PH Primary 460V Secondary 460Y/266 Dimension: 22.37 Inch Length x 28.15 Inch Width ACME Electric 3-Phase Drive isolation transformer with a rating of 63 kVA has primary configuration of delta and secondary configuration. It has a primary voltage of 460 Volts Delta and secondary voltage of 460Y/266 Volts at 60 Hz. Lugs/bolt-down terminals provide easy connections and transformer has aluminum winding for high conductivity.

The Antek 600VA isolation power toroidal transformers are commonly used for high end equipment such as audio amp and sensitive instrument. They are specially designed to work on all standard 115V or 230V at 50Hz or 60Hz. In addition, there are 2 accessory coils (high current) to add on either input or output coil to boost up output or increase input voltage.

The Antek 1500VA isolation power toroidal transformers are commonly used for high end equipment such as audio amp and sensitive instrument. They are specially designed to work on all standard 115V or 230V at 50Hz or 60Hz. In addition, there are 2 accessory coils (high current) to add on either input or output coil to boost up output or increase input voltage.

Electronic Component

Please see pictures for full details and feel free to message me with any questions. Toroid Corporation ISB-100W Medical Grade Isolation Transformer comes with what you see in the pictures. Specifications are from manufacturer and may vary slightly due to upgrades, options, or revisions this unit may or may not have.

The 600VA toroidal transformers are commonly used in the noise sensitive equipment, high-end audio products, isolation transformer, stepper motor supply, or servo motor supply. They are specially designed to work on all standard 115V or 230V at 50Hz or 60Hz. These transformers have heavier gauge wires then the normal requirement to avoid the copper lost during the full power output.

This is a used Dry Type Transformer For Sale. It was removed from service due to plant closure and it WILL BE CLEANED AND TESTED FOR CONTINUITY PRIOR TO SHIPPING! Then it will be placed onto a standard 48"x40" pallet on top of plywood, double banded down, secured to the pallet with screws, then shrink wrapped on our machine.

Brand New Interpoint DC to DC Converter & Switching Regulator Module #MHE2815S. Parts are brand new and have never been used. Surplus from a project.

This unit is really heavy, estimate around 100lbs, FERRORESONANT Constant Voltage Transformer. Size 22" high, 11" wide, 8.5" d. It was used to suppress fluctuations of the power line and to reduce interference.

This listing is a fully operational, professionally uninstalled Liebert Npower MX 80 KVA UPS with a model WJ1 battery cabinet. The batteries have been removed from the unit as shown in the pictures so a successful purchaser will need a full set of batteries. As shown in the images, this listing includes even the manuals and installation paperwork original to the equipment.

Thank you for visiting our store. Please read everything before making purchase. E-mail us with questions.

DESCRIPTION: Tamura Transformer, 3FS-436, unused surplus, original packaging for federal government, excellent condition No packaging included Input: 115 vac Output: 36V; 0.17A or 18V; 0.34A NAME ITEM NAME TRANSFORMER,POWER,VIBRATOR

Signal Transformer #36-12 For your consideration is a Signal Transformer #36-12 in like new condition. This transformer was purchased by me for a project that never got off the ground. This is a heavy duty transformer and it has input taps for 0 or common as well as 105 volt, 115 volt and 125 volt.

Variac is a variable transformer and a great device for quality control testing, equipment testing on low and high voltage, control over heat, speed, and more. In order to purchase the right variac, it is critical that you know the amp usage by your electronic device. It is always best to be conservative otherwise you risk destroying the variac and it can be very dangerous.

The 600VA toroidal transformers are commonly used in the noise sensitive equipment, high-end audio products, isolation transformer, stepper motor supply, or servo motor supply. They are specially designed to work on all standard 115V or 230V at 50Hz or 60Hz. These transformers have heavier gauge wires then the normal requirement to avoid the copper lost during the full power output.

The 600VA toroidal transformers are commonly used in the noise sensitive equipment, high-end audio products, isolation transformer, stepper motor supply, or servo motor supply. They are specially designed to work on all standard 115V or 230V at 50Hz or 60Hz. These transformers have heavier gauge wires then the normal requirement to avoid the copper lost during the full power output.